Name: DN 126 Anchor Wedge Clamp for Wire Termination
Brand: DAZ
Availability: InStock

DN 126 Anchor Wedge Clamp for Wire Termination

Brand: DAZ

$0.90 - $3.60 USD

MOQ: 2000 pieces

Key Features

Minimum breaking load of the clamp: 8000 thousand ct

Minimum cross-sectional area: 2x16 inch

Maximum cross-sectional area: 4x35 inch

CIP type: CIP-4

More from DAZ

Silicone Ring PШИ-2 for Securing Wires on Insulators

$0.30-$1.80

Intermediate Suspension Set for SIP-2 ES54-14R

$9-$30

Insulated Terminal CPTA R 95 for SIP Connection

$0.90-$3.60

Support Clamp for 4-Conductor SIP Line PSP16/120

$1.50-$6

Support Clamp PSR 35-240 for Uninsulated Wires

$9-$36

Suspension Support Clamp PS 1500 for SIP-2 Fastening

$0.90-$3.60

Anchor-Supporting Clamp PAS216-435

$0.90-$3.60

N640 Weatherproof Branch Connector for SIP Cables

$3-$18

SFW-50 Facade Cable Mounting Bracket

$0.15-$0.60

Universal Hook CS 16 for Anchoring and Support Clamps

$0.90-$3.60

Through Hook V16-240 for Anchor and Support Mounting

$0.90-$3.60

Arc Protection Device for Overhead Power Lines SE 1

$30-$120

Polyethylene Cap for Pin Insulators - K9

$0.12-$0.60

SIP-2 Suspension Support Clamp PS 1500R

$0.90-$3.60

Polymer Insulator SML 70/10-3GS for Power Line Applications

$9-$36

SIP Branch Anchor Bracket CA25

$0.30-$1.80

CS1500 Anchor Bracket for Support Clamps

$3-$18

KO-260 Remote Fastener for SIP and Cable Mounting

$0.15-$0.60

RA 25S Wedge Anchor Clamp for Conductor Termination 16-25 mm²

$0.90-$3.60

Spiral Binding for Secured Wires - SV 35

$0.12-$0.60

Description

Designed for end fastening of branch wires with cross-section 16-35 mm² from the main line to the inputs. The fittings are designed for operation at ambient air temperature from minus 60 to plus 50 ° C, at an altitude of up to 1000 m above sea level in areas with 1-4 degree of pollution, in all areas of wind and ice.
Climatic execution and placement category UHL 1 according to GOST 15150-69..