Low Voltage Power Cables (up to 1 kV)
Medium Voltage Cables (6-35 kV)
Building & Residential Wires
Aluminum Low Voltage Cables (up to 1 kV)
Communication, Signal & Structured Cabling
Copper Low Voltage Cables (up to 1 kV)
Control Cables
Installation & Mounting Cables
Cable Joints & Terminations
Self-Supporting Insulated Conductors (Aerial Lines)
Cable & Wire Fittings & Clamps
Marine, Oil & Gas, and Mining Cables
Cable Accessories (Lugs, Sleeves, Markers)
Fiber Optic Cables
Cords & Extension Cables
Other Cable Products
Copper & Aluminum Busbars
Thermocouple & Compensating Cables
Hook-Up Wires
Bare Conductors for Overhead Lines
Magnet Wire & Enameled Wire
Other Cables & Wires
Products — Cables & Wiring
Multi-Core Copper Cable KRUIN-(M)RpEfLnzng(A)-LS –U* (1-37)x(2,3,4)x(0.2-2.5)
$1.20-6
LLC "NPO "PZSK" 🇷🇺
Multistrand Copper Cable KRUINv-(M)PsElKng(A)-HF –U* (1-37)x(2,3,4)x(0.2-2.5)
$1.50-6
LLC "NPO "PZSK" 🇷🇺
KRUINv-(M)RpEfmnzng(A)-LS-U* Multi-Core Cable (1-37)x(2, 3, 4)x(0.2-2.5)
$0.90-3.60
LLC "NPO "PZSK" 🇷🇺
Multi-Core Copper Cable KRUIN-(M)PsEfNzng(A)-HF –U* (1-37)х(2,3,4)х(0.2-2.5)
$0.90-3.60
LLC "NPO "PZSK" 🇷🇺
High-Voltage Power Cable PYREX® with Ethylene-Propylene Rubber Insulation - Model ARэВн
$0.60-6
TOMSKKABEL LLC 🇷🇺
Multi-Conductor Copper Cable KRUINv-(M)REFnzn(A)-FRHF-U* (1-37)x(2,3,4)x(0.2-2.5)
$2.10-8.40
LLC "NPO "PZSK" 🇷🇺
Multi-Core Copper Cable KRUIN-(M)PsEfzn(A)-HF –U* (1-37)x(2,3,4)x(0.2-2.5)
$1.50-6
LLC "NPO "PZSK" 🇷🇺
Multi-core Copper Cable KRUINv-(M)RpEfmkng(A)-HF –U* (1-37)x(2, 3, 4)x(0.2-2.5)
$0.90-3.60
LLC "NPO "PZSK" 🇷🇺
Non-Flame Spreading Power Cables with Russian Light® Brand CPRРкЭ(i)К(i)Шв
$1.80-18
ENERGO-KABEL OJSC 🇷🇺
Multi-Core Insulated Cable KRUIN-(M)REFmkng(A)-HF –U* (1 – 37)x(2, 3, 4)x(0.2-2.5)
$9-36
LLC "NPO "PZSK" 🇷🇺
Flexible PVC Insulated Cable for Power Distribution - КПГВБбВ/нг(А)/нг(А)-LS/нг(А)-FRLS
$0.90-6
Podolsk Cable OJSC 🇷🇺
KRUIN-(M)Pseflnzng(A)-LS-U* Cable for Electrical Applications (1-37) x (2, 3, 4) x (0.2 - 2.5) mm²
$1.20-7.20
LLC "NPO "PZSK" 🇷🇺
Multi-Conductor Copper Cable KRUINv-(M)REMfnzng(A)-LS-U* (1-37) x (2, 3, 4) x (0.2 - 2.5)
$1.50-6
LLC "NPO "PZSK" 🇷🇺
Power and Control Cables by the Kilometre: 6,200+ Listings from Russian Cable Plants
With 6,213 positions from 239 suppliers, this is one of the deepest sections of the catalogue — a reflection of a cable industry that ranks among the world's largest outside China. Low voltage power cable up to 1 kV forms the core (2,033 listings, including 531 aluminium and 392 copper series), supported by 707 medium voltage cables for 6–35 kV networks, 578 building and residential wires, 425 communication and structured cabling positions, 363 control cables and 222 installation cables. Specialised demand is covered too: 108 self-supporting insulated conductors for aerial lines, 89 cables for marine, oil-and-gas and mining service, plus joints, terminations, lugs and fittings.
Russian plants extrude to GOST constructions that correspond closely to IEC designs — the familiar VVG, AVBbShv and SIP families map onto international cross-sections and insulation classes — and every drum passes routine voltage testing before dispatch. For utilities and wholesalers in Central Asia, the Middle East and Africa, the draw is simple: copper and aluminium conductor at near-commodity pricing with full factory test documentation.
- Order basis: by the drum, typically 0.5–4 km per drum depending on cross-section; project lots quoted per cable schedule.
- Custom lengths: drums cut to your section lengths to reduce site waste.
- Testing: routine test certificates per drum; type test protocols for tender files.
- Fire performance: low-smoke halogen-free and fire-resistant executions available in most families.
- Delivery: rail and truck across the EAEU; FOB Novorossiysk or St. Petersburg for sea cargo.
Upload your cable schedule and factories will quote per kilometre against each line.
FAQ
•How do Russian cable types correspond to IEC designations?
Construction principles match: VVG corresponds to copper PVC-insulated power cable of the IEC 60502-1 type, AVBbShv to armoured aluminium cable, and SIP to aerial bundled conductor. Cross-sections follow the same square-millimetre series. Suppliers issue comparison sheets and full construction drawings so your engineers can approve equivalence against project specifications.
•What is the minimum order — can I buy less than a full drum?
The drum is the practical unit: cutting opens a factory length and most plants avoid it for small remnants. However, plants will wind custom lengths to order — say, 12 drums of 350 metres to match your feeder runs — which is more useful than buying standard lengths and generating offcuts. Project lots start around 5–10 km total.
•Are fire-rated and halogen-free executions available?
Yes. Most power and control families come in low-smoke halogen-free (ng-LS, ng-HF) and fire-resistant (FR) executions, tested for flame spread, smoke density and circuit integrity under fire. State the fire performance class your code requires and the plant will match it and attach the corresponding test protocols.
•What documentation supports a utility tender submission?
Plants provide type test protocols, routine test certificates per drum, EAC conformity declarations, construction drawings and ISO 9001 factory certification. For medium voltage cable, partial discharge and voltage test records are included. This package normally satisfies tender technical files; specific national homologation, where required, is discussed case by case.
•How is cable shipped and how long does it take?
Drums load into containers or open wagons; a 40-foot container carries roughly 15–25 tonnes of cable depending on drum sizes. Production of non-stock positions takes 2–5 weeks. Trucking to Central Asia adds 7–14 days; sea freight from Novorossiysk or St. Petersburg to the Gulf or East Africa runs 25–45 days.
•Can conductors be supplied in aluminium to cut project cost?
Yes, and this is a major lever: aluminium low voltage cable, with 531 listings here, prices well below copper for distribution feeders where the larger cross-section is acceptable. Suppliers will recalculate your copper schedule into aluminium equivalents, showing the cross-section conversion and the cost difference per kilometre, so you can decide line by line.