Measured vibration velocity range, RMS
0 ... 10 mm/s
Operating frequency range of measured vibration velocity (AFC non-uniformity - 1 dB)
3 ... 1 000 Hz
Output
Voltage 0 ... 10 ?
Input/output connectors
screw terminals
Measurement error in the operating temperature range
±2 %
Types of connected vibration transducers
IEPE, with voltage output and negative supply
Sensor supply voltage
IEPE + 24 ± 2 V
IEPE sensor supply current (±10 %)
5.7 mA
Dry contacts
for monitoring of vibration velocity LIM1, LIM2
Parameters of built-in comparators
Values of adjustable thresholds of vibration velocity RMS 0,1 ... 100 mm/s. 100 mm/s
Conditions of signalling (closed or open) of "LIM1", "LIM2" relay contacts
Continuous exceeding of a preset threshold value by an informative signal within 0-100 s
Mode of operation of relay contacts
lockout/self-recovery
Self-recovery condition
6% reduction of vibration from the trigger threshold
Delay of vibration control after establishing operation mode/self-recovery
0 or 20
Dry contact parameters
switching current < 2 A
Information displayed on the built-in display
Vibration velocity RMS, sensor conversion coefficient, values of set thresholds, error codes in case of cable breakage and sensor failure, setting of time of exceeding threshold values, relay contacts state.
Consumption current
< 200 mA
DIN rail mounting
Armoured glass
Feature
Measurement of parameters by means of spectral analysis (FFT)
Step of setting the time of exceeding the vibration velocity threshold values
1 -
Supply voltage (±10 %)
18...36 thousand m³
Weight
200 million m² total area
Operating temperature range
-40...70 million m³