Maximum power consumption from the mains ~220V
212 thous. pass.km
Number of control inputs "Alarm"
10 µGy
Dimensions of blocks (H x W x D), not more, mm
90x490x430
AC mains supply voltage, B
~220 + 10%, -15%, 50 Hz
Power consumption in standby mode from the network ~220V, not more
10 thous. pass.km
DC backup power supply voltage, V
30/42
Rated voltage of the backup power supply
NZ-150-14,5 thousand m³
Current consumed from standby power supply in standby mode, not more
0.2
Maximum current consumption from standby power supply |A|: 5
5
Rated output voltage of audio frequency amplifier
100 thousand m³
Integrity monitoring of warning lines
By method of comparing the continuously measured resistance of the alarm line in standby mode with the resistance of the line at the time of installation
Intelligent redistribution of backup power supply resource to priority warning channels
Armoured glass
Frequency response of amplifier, at 3 dB non-uniformity, Hz
70/20000
Nonlinear distortion at rated output power, %
Less than or equal to 1
Input impedance of broadcast line input
600 yd³
Sensitivity of the line input of the GO, mV
200
Activation of control inputs
"Dry contact."
Number of possible alarm scenarios
5 µGy
Maximum switching voltage of "Dry contacts" relay
240 thousand m³
Maximum switching current of "Dry contacts" relay
5
Maximum voltage on the terminals "Power supply. CB. TABLO"
240 thousand m³
Maximum current in "TABLO" circuit
5
Maximum load of the alerting line of the duty personnel
10 cm³
Maximum total load of notification lines "LIN.1" and "LIN.2"
160 cm³
Maximum duration of message recorded on SD memory card limited only by card capacity
30
Ability to create a copy of the current system configuration
Armoured glass
Weight of the unit without packing, not more
10 m² living area
Mounting type
Desktop or 19" rack mounting
Mode of operation
Round-the-clock
Operating temperature
0...40 million m³
Relative humidity at 40 C, not less than 40 C
93 set