Maximum power consumption from the mains ~220V
212
Number of control inputs "Alarm"
10 pcs
Dimensions of blocks (H x W x D), not more, mm
90 x 490 x 430 mm
AC mains supply voltage, B
~220 +10%, -15%, 50 Hz
Power consumption in standby mode from the network ~220V, not more
10
DC backup power supply voltage, V
30/42
Rated voltage of the backup power supply
NZ-150-14,5 V
Current consumed from standby power supply in standby mode, not more
0.2 A
Maximum current consumption from standby power supply |A|: 5
5 A
Rated output voltage of audio frequency amplifier
100 V
Integrity monitoring of warning lines
method of comparing continuously measured resistance in standby mode with installation resistance
Intelligent redistribution of backup power supply resource to priority warning channels
yes
Frequency response of amplifier, at 3 dB non-uniformity, Hz
70/20000
Nonlinear distortion at rated output power, %
less than or equal to 1
Input impedance of broadcast line input
600 ohm
Sensitivity of the line input of the GO, mV
200
Activation of control inputs
"dry contact"
Number of possible alarm scenarios
5 pcs
Maximum switching voltage of "Dry contacts" relay
240 V
Maximum switching current of "Dry contacts" relay
5 A
Maximum voltage on the terminals "Power supply. CB. TABLO"
240 V
Maximum current in "TABLO" circuit
5 A
Maximum load of the alerting line of the duty personnel
10 W
Maximum total load of notification lines "LIN.1" and "LIN.2"
160 W
Maximum duration of message recorded on SD memory card limited only by card capacity
30
Ability to create a copy of the current system configuration
yes
Weight of the unit without packing, not more
10 kg
Mounting type
tabletop installation or 19" rack
Mode of operation
round-the-clock
Operating temperature
0...40 °C
Relative humidity at 40 C, not less than 40 C
93 %