Optical-Electronic Linear Smoke Detector IPD-52 Model IP212-52

Brand: IVS

$90 - $300 USD

MOQ: 20 pieces

Key Features

Range of possible distances between receiver and transmitter: 8...100 m

Maximum possible width of the space to be protected by one detector: 9 m

Maximum possible room area protected by one detector: 900 mile

Detector power supply voltage (receiver and transmitter): 10...30 thousand m³

Supplier Information

IVS LLC

🇷🇺 📦 🏭 🛡️

View All Products

Quick Inquiry

Description

Linear smoke detector for the protection of premises of large area or length. Distinctive features of this modification: two-position version (receiver + transmitter); working distance from 8 to 100 metres; wide range of angles of adjustment. Receiver and transmitter have the same design and are made in the form of a rectangular plastic housing with a board with radio elements and optical system installed inside it.

Along the inner surface of the case there is an electric screen covering both the board with radio elements and the optical system. The optical system is protected against penetration of insects and dust, and the protection is provided against penetration both from outside the enclosure and from its internal space. The optical system consists of two optical units isolated from each other, i.e.

it has a two-lens (two-channel) design.

Specifications

Range of possible distances between receiver and transmitter

8...100 m

Maximum possible width of the space to be protected by one detector

9 m

Maximum possible room area protected by one detector

900 mile

Detector power supply voltage (receiver and transmitter)

10...30 thousand m³

Current consumed by the detector in the "Normal" mode (when the transmitter is powered from the receiver via communication line)

0.0025

Current consumed by the receiver in "Normal" mode (when the transmitter is powered from a separate source) not more than

0.0025

Current consumed by the transmitter when powered from a separate source (in any operating mode) not more than

0.0012

Current consumed by the receiver in the mode of forming the output signal "Attention", not more than

0.011

Current consumed by the receiver in the mode of forming the output signal "Fire", not more than

0.04

Current consumed by the receiver in the mode of forming the output signal "Fault", not more than

0.011

Current surge value at formation of the output signal "Attention"

0.00675...0.00825

Maximum possible duration of interruptions or polarity reversals of the supply voltage that do not affect normal operation

0.1 -

Minimum permissible power interruption interval frequency

Minimum required duration of power failure to ensure resetting of recorded notifications

2 -

Typical inertia of detector operation (for "Attention" and "Fire" signals)

5 -

Maximum inertia of detector actuation (by signals "Attention" and "Fire")

10 -

Inertia of "Fault" notification fixation in the "Fault - memory" mode

3...5 -

Inertia of "Fault" notification fixation in the "Fault - tolerance" mode

3...5 -

Inertia of "Fault" notification fixation in the "Fault - Beam" mode

1.5...2.5 -

Inertia of "Fault" notification fixation in the "Fault - synchronization" mode

40...70 -

Inertia of "Fault" notification fixation in the "Fault - failure" mode

40...70 -

Inertia of "Fault" notification fixation in the "Fault - excess" mode

40...70 -

Inertia of "Fault" notification fixation in the "Fault - Reduction" mode

40...70 -

Typical value of resistance of closed contacts of optorelay outputs

15 yd³

Maximum value of resistance of closed contacts of optorelay outputs

25 yd³

Maximum permissible current value switched by the optorelay outputs

0.1

Maximum permissible voltage value switched by the optorelay outputs

100 thousand m³

Limit value of sensitivity compensation at optical beam power reduction

Maximum permissible value of wire resistance of the communication line between the receiver and the transmitter

220 yd³

Weight of receiver and transmitter separately without adjusting device, not more

0.4 m² living area

Weight of receiver and transmitter separately with alignment device, not more than

0.6 m² living area

Degree of protection of the shell according to GOST 14254, IP

What do you need?

Your Contact Information

Request Submitted!

Furniture

Electrical & Lighting

Transport & Special Vehicles

Industrial Equipment

Medical & Healthcare

Safety & Security

Auto Parts & Accessories

IT & Telecommunications

Toys & Children Products

Agriculture Equipment

Textiles & Fabrics

Construction & Building

HVAC & Refrigeration

Home Appliances

Sports & Seasonal

Optical-Electronic Linear Smoke Detector IPD-52 Model IP212-52

Key Features

Description

Specifications

Related Products

Addressable Optical-Electronic Smoke Detector IP 212-64-R3

Aspirating Smoke and Heat Fire Detector IPA v4

Optical-Electronic Linear Smoke Detector IP212-75Ex-Yastreb

Optical-Electronic Linear Addressable Smoke Detector IP212-C6500-XX

Non-addressable Smoke Fire Detector IP 212-78 Aurora-DN

Optical-Electronic Addressable Smoke Detector IP 212-149

Optical-Electronic Addressable Smoke Fire Detector IП 212-149

Optical-Electronic Linear Addressable Smoke Detector IP 212-118 Amur-I Model L

Optical-electronic smoke fire detector A3DPI without base

Optical-Electronic Linear Smoke Detector IPD-75CMD

Optical-Electronic Smoke Detector, Ex-proof Model IP 212-116.2 Trion MK

Optical-Electronic Point Smoke Detector IP 212-116 Trion VZ

Addressable Analog Optical-Electronic Smoke Detector IP 212-108 MAX

Heat Detector for Fire Alarm Systems RUBETEK IP 101-102-A1R/Wh

Optical-Electronic Point Smoke Detector A2DPI Model 08

Optical-Electronic Linear Addressable Smoke Detector IP 212-118/2 SPK-MAX-DL

Combined Optical-Electronic Heat Smoke Fire Detector IP 212/1

Optical-Electronic Smoke Fire Detector IP 212-01

Maximal Differential Addressable Analog Heat Fire Detector IP 101-80/4-A1R SPK-MAX-T

Optical-Electronic Smoke Detector IP 212-189A

Related Categories

Find Similar Products By Category

Popular Brands

Save Your Time!