Instrument for intramedullary osteosynthesis of the humerus. It is used for the insertion of intramedullary pins. Made of titanium alloy.
U-shaped. For connection with the guide it has two pins with a diameter of 6 mm and length of 9 mm on one side, on the other side it has a cannulated sleeve with an outer diameter of 9.5 mm and an inner diameter of 6.2 mm under the screw-tie. For connection with a pin with a width of 3 mm and height of 1.9 mm at the end of the sleeve is a cylindrical half-ring with an outer diameter of 7.6 mm, height of 2.6 mm.
Overall length 123 mm, height 86.5 mm, maximum width 35 mm. Laser marking of the article. Reusable.
Tell us what you need and get quotes from verified suppliers