Instrument for intramedullary osteosynthesis of the femur. It is used for insertion of plates and screws for open or endoscopic anterolateral stabilisation of vertebral bodies from Th 3 to L5, transpedicular system, femoral pins. Made of corrosion-resistant stainless steel. The handle is made of textolite. The total length is 336.5 mm. The handle is 38 mm in diameter with thinning on the plane up to 20 mm, 110 mm long and labelled with hexagon size. The screwdriver stub is stepped with a diameter of 5 mm and a diameter of 7 mm, length 226,5 mm with hexagon size S=3,5 mm. Laser marking. Reusable.
Related Products
Hexagonal Cannulated Screwdriver S=2.5 mm, Art. 570.010
$1.80-$9.60 USD
Length:
214
Material:
Corrosion resistant stainless steel
OSTEOMED-M LLC 🇷🇺
Hex Screwdriver, S=4.0 mm, Article 550.003
$3-$18 USD
Length:
300
Hexagon size:
4
OSTEOMED-M LLC 🇷🇺
Corrosion-resistant Hex Screwdriver (1.5-3.5 mm)
$0.90-$3.60 USD
Length:
140...215
Material:
Corrosion resistant stainless steel
OSTEOSYNTHESIS LLC 🇷🇺
Hex Screwdriver S=2.5 mm, Article 840.525
$9-$36 USD
Length:
260
Hexagon size:
2.5
OSTEOMED-M LLC 🇷🇺
Hex Screwdriver S=2.5 mm, Cannulated, Article OM.006.19.25
$9-$36 USD
Length:
280
Hexagon size:
2.5
OSTEOMED-M LLC 🇷🇺
Hex Screwdriver for Cannulated Screws S=3.5 mm, OM.006.19.01
$3-$18 USD
Length:
262
Hexagon size:
3.5
OSTEOMED-M LLC 🇷🇺
Vertical Three-Stage Cylindrical Gear Reducer V-400 for Crane Systems
$900-$3,600 USD
Number of steps:
3
Number of steps:
3
PTC "PRIVOD" LLC 🇷🇺
Fine Module Planetary Gearbox MPR-100-135-500
$90-$300 USD
Height:
53
Width:
92
NPK KALIBR LLC 🇷🇺
Right Gearbox Cover for VL10, VL11 PЦ300.076-12CB
$90-$360 USD
Resistant to corrosion, oils, gasoline:
Outer surfaces of the casing are resistant to corrosion, oil, petrol.
tightness:
The casing is hermetically sealed
PCP LLC 🇷🇺
Horizontal Two-Stage Cylindrical Gear Reducers PM Series
$900-$18,000 USD
Weight:
172...1230
Transfer ratios:
U = 8; 10; 12,5; 16; 20; 25; 31,5; 40; 50
