Collector DC Voltage Reproduction Ranges:100...400 thousand m³
Anode 1 DC voltage reproduction ranges:0...50 thousand m³
Collector DC voltage setting step:1 thousand m³
Anode 1 DC voltage setting step:0.1 thousand m³
More from OSTEC
Microchip Cutter for Precision Circuit Board Cutting
$180-$720
Mobile Portable Complex for Detecting Wire Installation Defects - MPK-24
$900-$3,600
Universal Measurement Systems for Plate Parameters IUS-7P
$1,500-$4,800
ESR and Capacitance Meter E7-53
$150-$480
Differential Probe for Oscilloscope Measurements
$150-$480
Ohmmeter for Electrical Resistance Measurement
$900-$3,000
Multifunctional Resonance LC Meter E7-35
$150-$480
Precision Source-Measurement Device B6-9
$210-$600
Insulation Resistance Meter E6 - 46
$150-$480
Surface Resistance Meter Semizond 4K
$900-$3,000
Precision Source-Measurement Instrument B6-8
$150-$540
Description
The purpose of electrical training is to provide a load equal to or less than the maximum permissible load during operation, or to provide such equivalent test conditions that allow the maximum number of potentially unreliable products in the tested batch to be identified in a short time.
Features:
Designed for electrical training of vacuum devices such as travelling wave lamps (VWL).
It allows simultaneous training of up to six devices.
It is equipped with a multi-level protection system against electric shock.
It has a load equivalent for periodic control of the stand output parameters.
TECHNICAL DATA
2.1 General information
2.1.1 The number of items to be trained simultaneously is six.
2.1.2 Warm-up time of the system before the start of operation not less than 30 minutes.
2.1.3 The system provides continuous operation mode for 16 hours with a subsequent break of at least 8 hours.
2.1.4 The system is powered from a single-phase AC mains voltage...
Specifications
Collector DC Voltage Reproduction Ranges
100...400 thousand m³
Anode 1 DC voltage reproduction ranges
0...50 thousand m³
Collector DC voltage setting step
1 thousand m³
Anode 1 DC voltage setting step
0.1 thousand m³
Anode 2 DC voltage reproduction ranges
0...250 thousand m³
Anode 2 DC voltage setting step 1565473:Anode 2 DC voltage setting step
1 thousand m³
Absorber DC Voltage Reproduction Ranges
0...15 thousand m³
Absorber DC voltage setting step
10000 thousand m³
Case DC Voltage Reproduction Ranges
5...50 thousand m³
Step for setting the case DC voltage values
0.1 thousand m³
Heater dc voltage reproduction ranges
20...400
Heater DC value setting step
1
DC voltage reproduction ranges of ESPs
500...3500 thousand m³
Step for setting the DC voltage values of the ESH
10 thousand m³
Related Products
Hydraulic Testing Stand for Turbofan Engine Components
$90,000-$360,000 USD
Effective (RMS) value of the first harmonic voltage:
26.51.66.190
Effective (RMS) value of the first harmonic voltage:
26.51.66.190
OJSC "NPP "TEMP" IM. F. KOROTKOVA" 🇷🇺
Electronic Control System Test Stand for Gas Turbine Engine
$30,000-$180,000 USD
Type of product according to PP RF 616:
Instruments and other instruments for measurement, control and testing
Type of product according to PP RF 616:
Instruments and other instruments for measurement, control and testing
OJSC "NPP "TEMP" IM. F. KOROTKOVA" 🇷🇺
DKSVM Testing Stand for Microprocessor Decoder ALS DKSVM 36465 000 00
$900-$3,000 USD
Overall dimensions, not more, mm:
250,0×72,5×174,0
Power supply voltage:
43...53
ELEKTROMEKHANIKA OJSC 🇷🇺
Compact Single-Axis Rotary Stand for Testing MEMS Sensors - SOA-15.05
$1,500-$4,800 USD
Angular speed range:
± 1500 deg/sec.
Angular speed range:
± 1500 deg/sec.
INERTECH LLC 🇷🇺
Measurement Stand for Microelectronic Components FT-17DT-256
$9,000-$36,000 USD
Maximum performance of functional control:
800 Mbps
Maximum performance of functional control:
800 Mbps
SOVTEST ATE LLC 🇷🇺
Measuring Stand for Monitoring Microelectronic Components FT-17HF-768
$90,000-$300,000 USD
Maximum number of channels:
768
Maximum performance of functional control:
800 Mbps
SOVTEST ATE LLC 🇷🇺
Automated Testing Stand for ALSN Devices SP-ALSN
$1,500-$4,800 USD
Power consumption:
250
Length of SP-ALSN:
245
ENGINEERING AT LLC 🇷🇺
Electropneumatic Safety Valve Testing and Adjustment Stand (SPP-EPK)
$3,000-$9,600 USD
Dimensions (DxWxH), mm:
1150×700×1450 mm
Dimensions (DxWxH), mm:
1150×700×1450 mm
ENGINEERING AT LLC 🇷🇺
Uniaxial Test Stand for Angular Velocity Measurements SIO-1
$4,200-$15,000 USD
Rotation speed error:
0,1 %
Rotation speed error:
0,1 %
DIAGNOSTICS LLC 🇷🇺
Uniaxial Testing Stand for Inertial Navigation Systems SIO-C
$9,000-$30,000 USD
Rotational speed range:
0,01-3600 deg/sec.
Rotational speed range:
0,01-3600 deg/sec.
DIAGNOSTICS LLC 🇷🇺
Electromechanical Drive Testing Stand - YKLYA 441463.009
