Products — Cables & Wiring

Power Cables CPRРкПснг(А)-HF by RUSSIAN LIGHT®

Power Cables CPRРкПснг(А)-HF by RUSSIAN LIGHT®

$0.90-6
ENERGO-KABEL OJSC 🇷🇺
Fire-resistant Power Cables RUSSIAN LIGHT® CPRAsVK(i)Shv

Fire-resistant Power Cables RUSSIAN LIGHT® CPRAsVK(i)Shv

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺
CPRAsVЭ(i)Б(i)Шв Power Cables by RUSSIAN LIGHT®

CPRAsVЭ(i)Б(i)Шв Power Cables by RUSSIAN LIGHT®

$0.90-6
ENERGO-KABEL OJSC 🇷🇺
Fire-resistant Power Cables CPRВВЭ(i)нг(А)-FRLS FE 240

Fire-resistant Power Cables CPRВВЭ(i)нг(А)-FRLS FE 240

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺
Fire-Resistant Power Cables CPRПсК(i)Пснг(А)-FRHF FE 240

Fire-Resistant Power Cables CPRПсК(i)Пснг(А)-FRHF FE 240

$1.20-9.60
ENERGO-KABEL OJSC 🇷🇺
Fire-resistant Copper Power Cables CPRПвВнг(А)-FRLS FE 240

Fire-resistant Copper Power Cables CPRПвВнг(А)-FRLS FE 240

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺
CPRAsVE(i)K(i)Shvng(A) Power Cables by RUSSIAN LIGHT®

CPRAsVE(i)K(i)Shvng(A) Power Cables by RUSSIAN LIGHT®

$0.90-6
ENERGO-KABEL OJSC 🇷🇺
Fire-Resistant Power Cables RUSSIAN LIGHT® CPRAsPReB(i)Shv

Fire-Resistant Power Cables RUSSIAN LIGHT® CPRAsPReB(i)Shv

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺
CPRАВЭ(i)Б(i)Швнг(А) Power Cables by RUSSIAN LIGHT®

CPRАВЭ(i)Б(i)Швнг(А) Power Cables by RUSSIAN LIGHT®

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺
Fire-Resistant Power Cables RUSSIAN LIGHT® CPRАППнг(А)-HF

Fire-Resistant Power Cables RUSSIAN LIGHT® CPRАППнг(А)-HF

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺
CPRAVK(i)SHvng(A) Low-Flame Power Cables by RUSSIAN LIGHT®

CPRAVK(i)SHvng(A) Low-Flame Power Cables by RUSSIAN LIGHT®

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺
CPRVVng(A) Low-Flame Power Cables by RUSSIAN LIGHT®

CPRVVng(A) Low-Flame Power Cables by RUSSIAN LIGHT®

$0.60-6
ENERGO-KABEL OJSC 🇷🇺
CPRAsReVng(A)-LS Fire-resistant Power Cables by RUSSIAN LIGHT®

CPRAsReVng(A)-LS Fire-resistant Power Cables by RUSSIAN LIGHT®

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺
CPRRkoB(i)Psng(A)-FRHF FE 240 Fire-Resistant Power Cable

CPRRkoB(i)Psng(A)-FRHF FE 240 Fire-Resistant Power Cable

$0.90-6
ENERGO-KABEL OJSC 🇷🇺
CPRAsVVE(i)ng(A) Fire-Resistant Power Cables by RUSSIAN LIGHT®

CPRAsVVE(i)ng(A) Fire-Resistant Power Cables by RUSSIAN LIGHT®

$0.90-3.60
ENERGO-KABEL OJSC 🇷🇺

Power and Control Cables by the Kilometre: 6,200+ Listings from Russian Cable Plants

With 6,213 positions from 239 suppliers, this is one of the deepest sections of the catalogue — a reflection of a cable industry that ranks among the world's largest outside China. Low voltage power cable up to 1 kV forms the core (2,033 listings, including 531 aluminium and 392 copper series), supported by 707 medium voltage cables for 6–35 kV networks, 578 building and residential wires, 425 communication and structured cabling positions, 363 control cables and 222 installation cables. Specialised demand is covered too: 108 self-supporting insulated conductors for aerial lines, 89 cables for marine, oil-and-gas and mining service, plus joints, terminations, lugs and fittings.

Russian plants extrude to GOST constructions that correspond closely to IEC designs — the familiar VVG, AVBbShv and SIP families map onto international cross-sections and insulation classes — and every drum passes routine voltage testing before dispatch. For utilities and wholesalers in Central Asia, the Middle East and Africa, the draw is simple: copper and aluminium conductor at near-commodity pricing with full factory test documentation.

  • Order basis: by the drum, typically 0.5–4 km per drum depending on cross-section; project lots quoted per cable schedule.
  • Custom lengths: drums cut to your section lengths to reduce site waste.
  • Testing: routine test certificates per drum; type test protocols for tender files.
  • Fire performance: low-smoke halogen-free and fire-resistant executions available in most families.
  • Delivery: rail and truck across the EAEU; FOB Novorossiysk or St. Petersburg for sea cargo.

Upload your cable schedule and factories will quote per kilometre against each line.

FAQ

How do Russian cable types correspond to IEC designations?
Construction principles match: VVG corresponds to copper PVC-insulated power cable of the IEC 60502-1 type, AVBbShv to armoured aluminium cable, and SIP to aerial bundled conductor. Cross-sections follow the same square-millimetre series. Suppliers issue comparison sheets and full construction drawings so your engineers can approve equivalence against project specifications.
What is the minimum order — can I buy less than a full drum?
The drum is the practical unit: cutting opens a factory length and most plants avoid it for small remnants. However, plants will wind custom lengths to order — say, 12 drums of 350 metres to match your feeder runs — which is more useful than buying standard lengths and generating offcuts. Project lots start around 5–10 km total.
Are fire-rated and halogen-free executions available?
Yes. Most power and control families come in low-smoke halogen-free (ng-LS, ng-HF) and fire-resistant (FR) executions, tested for flame spread, smoke density and circuit integrity under fire. State the fire performance class your code requires and the plant will match it and attach the corresponding test protocols.
What documentation supports a utility tender submission?
Plants provide type test protocols, routine test certificates per drum, EAC conformity declarations, construction drawings and ISO 9001 factory certification. For medium voltage cable, partial discharge and voltage test records are included. This package normally satisfies tender technical files; specific national homologation, where required, is discussed case by case.
How is cable shipped and how long does it take?
Drums load into containers or open wagons; a 40-foot container carries roughly 15–25 tonnes of cable depending on drum sizes. Production of non-stock positions takes 2–5 weeks. Trucking to Central Asia adds 7–14 days; sea freight from Novorossiysk or St. Petersburg to the Gulf or East Africa runs 25–45 days.
Can conductors be supplied in aluminium to cut project cost?
Yes, and this is a major lever: aluminium low voltage cable, with 531 listings here, prices well below copper for distribution feeders where the larger cross-section is acceptable. Suppliers will recalculate your copper schedule into aluminium equivalents, showing the cross-section conversion and the cost difference per kilometre, so you can decide line by line.