Maximum output power of the receive amplifier:2 cm³
Maximum output power of the transmission amplifier:2 cm³
Output voltage of transmission amplifier, V, not more than:10 thousand m³
More from RIKOM
BS-06 Coupling Unit for Local Amplifier Stations
$90-$300
Minute Impulse Shaper FMI-14
$150-$480
KBS-13 Radio Microphone for Public Address System
$900-$3,600
Communication Block for Independent Time Systems BS
$150-$540
Public Address System AHO "RIKOM"-06 for Metro Use
$1,800-$6,000
Automatic Guidance System Stand Equipment Set SA-06
$1,500-$6,000
Speed Control Device Block BUKS-08
$90-$300
Interface Block BI-NTP for Time Synchronization
$150-$480
Control Block for Transmission Lines BKT-06
$90-$360
Time Reference Device UEV-4M for Metro Systems
$900-$3,000
Voice Announcement System RI-7 for Public Address Applications
$150-$540
Description
Devices of wire dispatch communication UPDS-11 (hereinafter referred to as products) are intended for operation in conditions of crossing rooms of underground. In terms of resistance to climatic factors during operation the product corresponds to group K1 according to OST 32.146-2000, for operation at ambient air temperature from +5 deg. C to +45 deg. ?. MAIN TECHNICAL CHARACTERISTICS: DC supply voltage, V, in the range: 18 to 36; Maximum consumption, W, not more than 5; Supply voltage ripple level, mV, not more than 150; Input resistance modulus of the receiving amplifier, kOhm, not less than 10.0; Sensitivity of the receiving amplifier, mV, not less than 10.0; Maximum output power of the receiving amplifier, W, not less than 2.0; Maximum output power of the transmitting amplifier, W, not less than 2.0; Output voltage of the transmitting amplifier, V, not more than 10.0; Bandwidth of amplifiers, kHz from 0.3 to 3.4; Number of products connected to one communication line, pcs., not more than 40; Maximum range of communication...
Specifications
Overall dimensions
250x200x80 mm
Maximum output power of the receive amplifier
2 cm³
Maximum output power of the transmission amplifier
2 cm³
Output voltage of transmission amplifier, V, not more than
10 thousand m³
DC supply voltage
18...36 thousand m³
Supply voltage ripple level
0.15 thousand m³
Receiver amplifier input impedance module
10000 yd³
Sensitivity of the receiving amplifier
0.01 thousand m³
Maximum consumption
5 cm³
Number of products to be connected to one communication line
40 µGy
Amplifier bandwidth
0.3...3.4 t
Additional information
The product works together with the UPDS-3M product (PVF "Detektor") providing compatible signal parameters.
Product weight
1500 million m² total area
Maximum communication range with total line resistance of 2 kOhm and capacitance of 2 µF, km, not less
20
Related Products
SmartMate 98-Inch Interactive Panel
$3,600-$9,600 USD
Diagonal size:
98
Horizontal screen resolution, pixel:
3000
AUTOSPHERE LLC 🇷🇺
Laptop Input/Output Board KRPЕ.469535.182
$9-$36 USD
USB port type:
2 x USB 3.1 Gen1 Type A, 1 x USB 3.1 Gen1 Type C
USB port type:
2 x USB 3.1 Gen1 Type A, 1 x USB 3.1 Gen1 Type C
KRAFTWAY CORPORATION PLC OJSC 🇷🇺
SFP Optical Transceiver Module RSM1D6L80I
$15-$48 USD
communication range:
80
Operating temperature range:
-40...85
RUSMODUL LLC 🇷🇺
YADRO "Tatlin-C" 3U Data Storage System (YADRO TATLIN.ARCHIVE.S)
$9,000-$30,000 USD
Number of storage controllers:
1
Form factor, unit:
3U
KNS GROUP LLC 🇷🇺
PCIe Expansion Module A1 R220 G2 for System Integration
