ADD-4009 I U1 Welding Machine with Electronic Panel
$1,500-$4,200
Welding Generator GD-4004 PR U2 version 00
$420-$1,500
Welding Generator ADD-4004 VG and U1 Sever
$1,500-$4,200
Welding Machine ADD-4004 I U1
$1,500-$4,200
Welding Machine ADB - 2x2502 PR and U1
$9,000-$24,000
Welding Machine ADD-4008 I U1 for Manual Arc Welding
$2,100-$6,000
Welding Generator GD-4004 U2 Type 27
$900-$3,000
Welding Generator GD-2х2503 PR U2 Version 00
$900-$3,000
Welding Machine ADD-4004.6 VG and U1 for Arc Welding
$2,100-$5,400
Welding Machine ADD - 4009 I U1
$1,500-$4,200
Description
The welding unit is designed to power two independent welding stations for manual arc welding, cutting and surfacing of metals with direct current with a fusion electrode and manual air-plasma cutting of ferrous, non-ferrous metals and stainless steel with thickness from 0.5 to 20mm. Additionally, it has a three-phase synchronous generator, which is designed to power power tools, drills, grinders, lighting and compressor connection for air-plasma cutting.
The unit is designed to work outdoors in the field. The rated parameters of the unit refer to its operation at an altitude of not more than 1000m above sea level, relative air humidity (monthly average) up to 75% at +15°C and the following ambient air temperature:
-From +40 to -40°C when welding and cutting with direct current piece electrodes;
-From +5 to +40°C for air-plasma cutting (from +40 to -20°C when using Kompressorenoel VDL100 oil when working with a compressor) .....
Specifications
Motor power
6 l
Rated welding current
250
Length
2480 mm
Rated welding operating voltage
30 thousand m³
Rated cutting operating voltage
70 thousand m³
Welding current control limits
35...250
Cutting current control limits
50...100
Welding idle voltage
Flat grinder, Specialised grinder thousand m³
Cutting idle voltage
190 thousand m³
Nominal welding cycle time
5
Load duration, PU
60 set
Engine model
?-242
Rotational speed
1800
Engine cooling
Closed type with forced coolant circulation
Summer fuel
DT-L-40-K2
Winter fuel
DT-Z-minus 35-K2
Hourly fuel consumption of the engine in nominal operation mode, not more than
0.00145 thousand kVAr
Fuel tank capacity
60
Compressor air pressure, max.
6 thous. t storage
Compressor capacity
3 l
Compressor capacity
0,25
Receiver volume
60
Rated power of the genset
7 l
Power generator frequency
SBVVBG kg
Rated voltage of the electric generator during welding
