Working pressure
1 thous. t storage
Equipment
Brake chamber - 1 pc. Transport plug - 2 pcs. Passport- 1 pc. Packing- 1 pc.
Diameter of the connection hole in the plug d1
14 mm
Width of fork slot B
14.2 mm
Connection thread of the mounting bolts d2
16 mm
Outreach of mounting bolts l
34 mm
Air inlet connection thread D
16 mm
Clamp installation angle ?°
45
Diaphragm stroke
71...75 mm
Spring travel of the energy accumulator
64...67 mm
Center distance of the air inlet connections
56 mm
Mechanical brake release unit screw key size
26.67...27 mm
Spring-loaded energy accumulator tripping pressure
0.48...0.54 thous. t storage
Installing the brake chamber
In accordance with the vehicle manufacturer's documentation
Maintenance of the brake chamber
In accordance with the operating manual of the motor vehicle for which the product is intended to be used
Safety measures
Repairs without special equipment are not permissible. For assembly work, be aware of the inscription on the flange of the spring energy accumulator "CAUTION! SPRING IS UNDER TENSION".
Certificate of Conformity
NO. EAES RU C-RU.MT14.V.00124/19
Storage conditions
The apparatus shall be stored in a container or on a rack under the condition of storage L according to GOST 15150-69 within six months from the date of shipment to the customer
Manufacturer's warranty
The company guarantees the compliance of the device with the requirements of GOST R 52848-2007 under the conditions of operation, transportation and storage.
Disposal information
The procedure for disposal of the product shall be determined by the Consumer.
Angle of turning of air inlet leads ?°, deg.
180
Weight
11.6 m² living area