Rheological Properties Diagnostic System for Blood (Thromboelastograph) NPTEG "ME

Brand: Mednord-Technika

$9,000 - $24,000 USD

MOQ: 1 sets

Key Features

Technical characteristics USB cable: Cable length not less than 0.5 metres USB 2.0 interface support

Technical data of the Power Supply Unit: Input parameters: power supply from 50Hz DC network with input voltage 220V±10% Output parameters: maximum current 3000mA±10%, output voltage 12V±10%, power not more than 36W Wire length not less than 1 metre Output connector 5,5x2,1

Technical characteristics of the PC: Intel processor or compatible PC with a clock speed of at least 1 GHz Built-in RAM of at least 512 MB Operating system Windows 7 or later Availability of a high-speed USB 2.0 port. A monitor with a minimum resolution of

Complex power supply: The power supply of the complex shall be provided from the AC network with frequency 50 Hz and voltage 220 V ± 10 %. The apparatus is powered through a power supply unit with a 5.5 x 2.1 mm output connector with the following output characteristics: voltag

Supplier Information

MEDNORD-T LLC

🇷🇺 📦 🏭 🛡️

View All Products

Quick Inquiry

Description

The complex is designed for registration of rheological properties of blood in the process of its coagulation.
Functional purpose - assessment of functional state of hemostasis for diagnostics of thrombotic and hemorrhagic complications at the stages of their diagnosis, treatment and prevention by registration of rheological properties of blood in the process of its coagulation, namely viscoelastic properties of blood.
Conditions of application - KDL, express-laboratories, as well as other medical units outside laboratories. It is intended for use by nursing staff of clinical diagnostic laboratories, medical laboratory technicians and doctors of clinical laboratory diagnostics in the conditions of clinical diagnostic laboratories and express-laboratories, as well as by clinicians who do not have a profile education in clinical laboratory diagnostics, in the conditions of other medical units outside the laboratory....

Specifications

Technical characteristics USB cable

Cable length not less than 0.5 metres USB 2.0 interface support

Technical data of the Power Supply Unit

Input parameters: power supply from 50Hz DC network with input voltage 220V±10% Output parameters: maximum current 3000mA±10%, output voltage 12V±10%, power not more than 36W Wire length not less than 1 metre Output connector 5,5x2,1

Technical characteristics of the PC

Intel processor or compatible PC with a clock speed of at least 1 GHz Built-in RAM of at least 512 MB Operating system Windows 7 or later Availability of a high-speed USB 2.0 port. A monitor with a minimum resolution of

Complex power supply

The power supply of the complex shall be provided from the AC network with frequency 50 Hz and voltage 220 V ± 10 %. The apparatus is powered through a power supply unit with a 5.5 x 2.1 mm output connector with the following output characteristics: voltag

Indications for use

оценка рисков кровотечения; интенсивная терапия пациентов со сложными и разнонаправленными нарушениями гемостаза; оценка ответа на гемостатическую терапию при медикаментозной коррекции гипокоагуляционных состояний; выбор сроков начала антикоагулянтной пр

Functional purpose

Functional purpose - assessment of functional state of haemostasis for diagnostics of thrombotic and haemorrhagic complications at the stages of their diagnostics, treatment and prevention by registration of rheological properties of blood in the process o

Completeness

Composition of the complex: "MEDNORD" apparatus, Power supply unit, PC with installed software "GEMO-5", USB cable, Cuvette (1-10 consumer packages, if necessary), Passport, Operation manual, Methodical manual "Piezotromboeelastography in diagnostics".