High-Performance Central Processing Module CPC152-02

Brand: DOLOMANT

$360 - $1,500 USD

MOQ: 5 pieces

Key Features

Processor: Vortex86DX™ 600MHz

RAM: Soldered DDR2 SDRAM 256 Mbytes

Operating temperature range: minus 40° C to plus 85° C

Compact Flash connector: Support Type 1 / 2 modules; support PIO, DMA, UDMA modes

Supplier Information

DOLOMANT OJSC

🇷🇺 📦 🏭 🛡️

View All Products

Quick Inquiry

Description

The CPC152-02 processor module is a highly integrated solution on the x86 platform in MicroPC format for use in real-time control systems, production control, data acquisition and processing. The module can operate in stand-alone or slave mode.

Connection of basic input-output means (VGA monitors, TFT-panels, AT-keyboards and other manipulators, audio devices, printers, USB devices) allows to use the CPC152 processor module in systems with operator participation. Both on-board storage and external USB and IDE devices can be used for data storage.

In addition to the standard MicroPC expansion bus (ISA 8-bit), the module has a PC/104 bus (ISA 8/16-bit), which allows you to connect additional expansion modules to the CPC152. The CPC152 module can be connected to RS-232, RS-422/485, Ethernet networks, which allows the module to be used in distributed I/O and information processing systems.

Specifications

Processor

Vortex86DX™ 600MHz

RAM

Soldered DDR2 SDRAM 256 Mbytes

Operating temperature range

minus 40° C to plus 85° C

Compact Flash connector

Support Type 1 / 2 modules; support PIO, DMA, UDMA modes

Expansion buses

MicroPC (ISA 8-bit, 8/16 MHz); PC/104 (ISA 8/16-bit, 8/16 MHz)

Built-in non-volatile memory

256 bytes internal memory; 8 Kbytes FRAM (SPI); 128 Kbytes SRAM (ISA)

FLASH BIOS

256 kbytes system-modifiable and backed up; automatic switch to backup in case of a boot error on the main one

FLASH disk

PATA NAND Flash controller with built-in ECC and wear control; 2GB NAND Flash (SLC)

Module weight

Not more than 150 g

Consumption current

Not more than 0.85A @ 5V (4.25W), does not take into account consumption of external devices

Console ports

COM3 / COM4 and/or VGA / LCD / Keyboard

Software compatibility with OS

Microsoft™ MS-DOS®6.22, FreeDOS; Linux 2.6; QNX 4.25, QNX 6.5x; Microsoft™ Windows CE 5.0; Microsoft™ Windows XP Embedded

Watchdog timers

Two built in CPU with 30.5µs...512s response interval; one built in power supervisor, with 1.6s response interval (used for automatic switchover to BIOS backup).

PC buzzer

Armoured glass

PS/2 keyboard and mouse port

Compatible with Model 8042; connect devices via separate connector; connect devices via standard MiniDIN6 connector using KIB98102 interface board.

GPIO port

8 I/O lines; 5V level compatible; 16 mA maximum output load capability; use of port for servo control (PWM); port can be used in Model 8051 compatibility mode.

Remote reset/interrupt port

Dry contact; voltage 3...15 V, 10...30 V; 500 V system isolation

Real time clock with built-in 3 V lithium battery

Armoured glass

Universal parallel port LPT

Support SPP, EPP, ECP modes; connection via separate IDC-26 connector; connection of devices via standard DSUB-25 connector using interface board KIB98201.

Serial ports

COM1, COM2: isolated RS-422/485 with lightning protection circuits; RS-422/485 exchange rate up to 750 Kbps; individual isolation of each port from the system 500 V; automatic (hardware) control of the direction of transmission. COM3, COM4: RS232 (9-wire

USB (host) ports

Support USB 1.1, USB 2.0 (HS, FS, LS); connect up to 4 devices; 2x USB Type A standard connector

Video subsystem

Video controller with 2D accelerator; 16 Mbytes of DDR video memory; independent connection of two displays; RGB monitor connection port with resolution up to 1920x1440, colour 32 bits; LCD (TFT or DSTN) panel connection port with resolution up to 1920x144

Audio port

Linear stereo input/output; microphone input (mono)

LAN port 10/100 Mbit

Standard RJ45 connector with LED indication; 500V system isolation.

HDD connection port

1 channel Primary; connection of up to two devices; Ultra-DMA 100 support; connection of 2.5" and 3.5" drives via KIB98201 interface board.