High-Integration Processor Module for Real-Time Control CPC316-01

$420 - $1,500 USD

MOQ: 5 pieces

Key Features

Processor: Vortex86DX3

RAM: DDR3 SDRAM 2 Gbytes (soldered on the board); memory bus bit rate 32 bits; memory bus operating frequency 533 MHz

Video subsystem: Video controller with 2D accelerator; connection port for VGA monitor with resolution up to 1920x1080, colour 32 bit; connection port for LVDS panel with resolution up to 1920x1080, colour 32 bit

Non-volatile RAM: 32 Kbytes, SPI interface; no battery power required

Supplier Information

DOLOMANT OJSC

🇷🇺 📦 🏭 🛡️

View All Products (107)

Quick Inquiry

Description

The product is a highly integrated solution on the x86 platform for use in real-time control systems, production control, data acquisition and processing and can operate in stand-alone or slave mode. Connection of basic input-output means (VGA monitor, LVDS panel, keyboard, printers, USB) allows to use the product in systems with operator participation. For data storage can be used as an internal drive or Compact Flash card, as well as external USB devices.

The product is designed in PC/104-plus format. In addition, the product allows for rapid replacement of the operating software embedded FPGA (FPGA), which provides additional opportunities for its adaptation to specific tasks. Expansion of the functionality of the product is also possible through the connection of additional expansion modules format PC/104 and PC/104-plus.

The product can be connected to RS-232, RS-485, Ethernet networks.

Specifications

Processor

Vortex86DX3

RAM

DDR3 SDRAM 2 Gbytes (soldered on the board); memory bus bit rate 32 bits; memory bus operating frequency 533 MHz

Video subsystem

Video controller with 2D accelerator; connection port for VGA monitor with resolution up to 1920x1080, colour 32 bit; connection port for LVDS panel with resolution up to 1920x1080, colour 32 bit

Non-volatile RAM

32 Kbytes, SPI interface; no battery power required

FLASH disk

Connected to SATA interface; at least 8 Gbytes of NAND Flash; read/write speed - 100 / 80 Mbytes / s; built-in wear control and ECC; availability of Compact Flash slot

LAN ports

10 / 100 Mbps port; 10 / 100 / 1000 Mbps port; 500 V system isolation of each port

USB (host) ports

Support USB 1.1, USB 2.0 (HS, FS, LS); connect up to 4 devices

SATA drive connection port

Standard SATA connector; 1.5 Gbit Gen I and 3 Gbit Gen II

Serial ports

COM1, COM2: RS-232, exchange rate up to 115.2 kbit/s, 15KV ESD protection (IEC1000-4-2); COM3, COM4: isolated RS-422/485 with lightning protection circuits, exchange rate up to 115.2 kbit/s, individual isolation of each port from the system 500V, automatic

Universal digital I/O port

48 CMOS/TTL lines, load up to 24 mA; possibility to change port functions (circuitry) in the system

PC/104 (ISA)

16-bit ISA bus, bus frequency 8/16 MHz

PC/104-plus (PCI)

32-bit PCI bus, frequency 33 MHz

Real Time Clock

Armoured glass

Built-in 3 V lithium battery

CR2032, typical capacity 200 mA*h

Watchdog timers

Two built in processor with 30.5 µs...512 s response interval; external, fixed 1.6 s response interval.

Integrated module temperature sensor

Measuring range minus 55 to plus 125 °C

Measurement of module secondary supply voltages by built-in ADC

Armoured glass

Buzzer

Armoured glass

Software compatibility with OS

Microsoft™ MS-DOS®6.22, FreeDOS; Linux 4.19; Windows Embedded Standard 7

Nutrition

Supply voltage: +4.75 to +5.25 V; current consumption: 2 A @ 5 V; protection against overvoltage and polarity reversal when supply voltage is applied via additional connector

Operating temperature range

minus 40 to plus 85 °C

Audio port

Microphone connection port (mono); Line audio output port (mono)