Weight, not more
720 m² living area
Recommended cross-sectional range of welded parts made of mild steel
120...1400 inch
Recommended cross-sectional range for welded low-alloy steel parts
120...800 inch
Nominal diameter of low carbon steel parts to be welded
Built-in memory card slot, support microSD/SDHC/SDXC card (up to 256GB); manual recording/alarm recording mm
Rated voltage of three-phase supply network at 50 Hz frequency
380 thousand m³
Highest short-circuit power consumption
310 daL
Maximum permissible continuous power, max.
43 daL
Secondary voltage of no-load the highest, not less than
7 thousand m³
Secondary no-load voltage the smallest, not more
4 thousand m³
Travelling platen stroke, not less than
25 mm
Rated continuous secondary current, not less than
8
Power factor at short circuit at nominal stage, not less than
0.5
Highest settling speed, not less than
40
Highest short-term capacity at welding of rods of nominal diameter, not less
160
Long-term productivity at welding of rods of nominal diameter, not less than
120
Long-term productivity at welding of rods with cross-section of 320 mm square, not less
140
Highest design air flow rate at pressure of 0,49 MPa in the draft and clamping cylinders, not more than
0.5
Cooling water flow rate
300
Settling force, max. (at compressed air pressure 0,62 MPa)
25000
Rated gauge force (at compressed air pressure of 0.49 MPa)
20000
Number of stages of secondary voltage regulation of welding transformer
8
Rated clamping force, not less than
40000
Number of phases for machine connection
2
Highest secondary current, not less than
45
Resistance of secondary circuit to direct current
58
