Highest secondary current
22±2,2
Rated mains voltage, at 50 Hz frequency
380 thousand m³
Highest short circuit power, not more than
112 daL
Number of phases for machine connection
2
Rated continuous secondary current
11
Rated operating mode, SP
SBVVBG set
Rated power at 50 per cent SP=50 per cent
65 daL
Welded parts thickness range
from 0,5+0,5 to 2,0+2,0
Highest electrode compression force at compressed air pressure of 490 kPa
6350±510
Smallest electrode compression force at compressed air pressure of 98 kPa
1650±130
Full stroke of the upper electrode
65 mm
Nominal diameter of upper drive roller
200 mm
Productivity at welding of minimum thickness, not less than
137 pass. flow
Monitoring and control system or degree of equipment with monitoring and control systems
On integrated circuits
Weight
760 m² living area
Cooling water flow rate, not less than
680
Resistance of secondary circuit to direct current, not more than
SBVVBG
Maximum short-term productivity when welding 0.8 mm+0.8 mm mild steel.
6
Linear welding speed on roller electrodes of nominal diameter, the smallest, not more
0.4
Linear speed of welding on roller electrodes of nominal diameter, the highest, not less than
6
Rated electrode compression force at 380 kPa compressed air pressure
5000
Number of adjustment steps
4
Specific energy consumption
1.02
Maximum continuous output for welding 0.8 mm+0.8 mm thick mild steel
2.3
