Rated output power
200 cm³
Number of fire alarm and activation inputs
10 µGy
Number of connected public address lines (not including duty personnel line)
2 µGy
Type of supported non-volatile memory (memory card types)
MMC, SD, SDHC
Maximum memory card capacity
32
Nonlinear distortion at rated output power, not more than
1 set
Line output voltage at rated output power
100 thousand m³
Amplifier bandwidth, 3 dB level
70...20000
Duty personnel line load capacity
10 cm³
Nominal signal level on line inputs
0.2 thousand m³
Input impedance rating for line inputs
600 yd³
Number of stages of microphone headset sensitivity adjustment
10 µGy
Number of stages of volume control in broadcast mode
10 µGy
Number of regulation steps independently for each zone
4 µGy
Number of contact groups for connection of fire evacuation actuators type ?? "dry contact"
2 µGy
Number of contact groups for connection of fire evacuation actuators of type NC "dry contact".
2 µGy
Switching load limit for switching on of fire evacuation actuators
5A, 240V
Switching load limit when switching on the external line of light boards
5A, 240V
Type of external contactor for activation of fire alarm inputs and triggering of CS notification
"dry contact"
Power consumption from 220 V power supply in standby mode, not more than
10 thous. pass.km
Power consumption from 220 V power supply in the mode of sound signal broadcasting, not more than
250 thous. pass.km
Rated voltage of the backup power supply
NZ-150-14,5 thousand m³
Current consumption from the backup power supply in the standby mode, not more than
0.2
Maximum current consumption from the backup power source
5
Open-circuit and short-circuit monitoring of input fire alarm loops, integrity monitoring of broadcast lines, connected
availability
The unit automatically switches to the backup power supply when the main power supply fails and automatically returns to the bac
availability
Resistance between the protective earth clamp and every metallic part of the device which can be touched.
0.1 yd³
Insulation resistance of power supply circuits from the earthed parts of the device, not less than
50 megohms yd³
Electrical insulation between mains circuits and earthed parts of the device withstands without breakdown for 1 m
1.5 kV Ampl.
Level of acoustic noises not more than
25 dBA
Designs of component parts of the device comply with the requirements of GOST 28601.3, and provides its installation in 19-inch
Compliance
Overall dimensions (length x height x depth) of the device components do not exceed
483 x 88.5 (2U) x 430 mm
Weight of the device does not exceed
10 m² living area
Assignment
Automatic control of speech warning and evacuation control system RECOR