Working pressure
0.8 thous. t storage
Clamp installation angle ?°
25...45 mm
Equipment
Brake chamber - 1 pc. Transport plug - 1 pc. Passport- 1 pc. Packing- 1 pc.
Assignment
The brake chamber is designed to convert the energy of compressed air into work to actuate braking mechanisms.
Disposal information
The procedure for disposal of the product shall be determined by the Consumer.
Manufacturer's warranty
The company guarantees the compliance of the device with the requirements of GOST R 52848-2007 under the conditions of operation, transportation and storage.
Storage conditions
The apparatus shall be stored in a container or on a rack under the condition of storage L according to GOST 15150-69 within six months from the date of shipment to the customer
Diameter of the connection hole in the plug d1
B1/B8 2100/900 MHz mm
Width of fork slot B
12.5 mm
Connection thread of the mounting bolts d2
16 mm
Outreach of mounting bolts l
40 mm
Air inlet connection thread D
16 mm
Weight
4.14 m² living area
Temperature range
-46...80 million m³
Installation of the apparatus
In accordance with the vehicle manufacturer's documentation
Maintenance of the brake chamber
In accordance with the operating manual of the motor vehicle for which the product is intended.
Safety measures
Before carrying out assembly and disassembly work on the flange connection of the brake chamber, make sure that the brake is not applied (no compressed air pressure in the chamber cavity).
Environment
Air, possible exposure to condensate, water, dust, dirt, engine oils, fuel vapors, brake fluids, detergents, road de-icing agents.
Operating medium
Compressed air, oil and water vapors may be present.
Certificate of Conformity
NO. EAES RU C-RU.MT14.V.00124/19