Fasteners & Hardware

STRUT Channel & Mounting Systems

Cable Brackets & Mounts

Other

Cable Trays & Accessories

Ground Anchor MR-3 - Self-Expanding Soil Anchor

$9-36

NPO BAZALTUM LLC 🇷🇺

45-Degree Horizontal Cable Tray Elbow for Type 2 Cable Trays (PG45-LKN)

$1.50-6

PROMTECNOLOGIES LLC 🇷🇺

90° Self-Tapping Countersunk Screws for Aviation Industry OST 1 31582-91

$0.09-0.60

NORMAL OJSC 🇷🇺

Reinforced Console NKU

$1.50-6

IEK Holding LLC 🇷🇺

Cover Plate for Tray Lid 80 HDZ CLP1S-NK-080-HDZ

$0.30-1.80

IEK Holding LLC 🇷🇺

SMO Console for Cable Trays and Engineering Systems 41x41x00-000

$1.80-18

SZ EMI OJSC 🇷🇺

90° Countersunk Head Bolts with Guiding Cone OST 1 31178-80

$0.30-2.40

NORMAL OJSC 🇷🇺

Steel Bolt for Threaded Fastening in Aviation - 8AT-2700-525

$0.30-1.80

AEROTECH LLC 🇷🇺

Screw Pile Installation Machine Good-V Lite 6x6

$15,000-42,000

VD-TECHNICA LLC 🇷🇺

Spring Wire Clamp for Railway Contact Lines KS-048-19

$3-18

TRANSPORT ELECTRIFICATION LLC 🇷🇺

Under-mount Sink Bracket for Worktop (Assortment) HA30.001.004

$0.60-2.40

STRIKE LLC 🇷🇺

Transfer Case and Transmission Mounting Plate 315100180100800

$9-36

UAZ LLC 🇷🇺

Installation Frame RU-M3 for SPM Series Plugs and Sockets

$1.50-6

KASKAD OJSC 🇷🇺

Mounting Elements Kit for 9V Systems Model 001.2

$3-18

PJSC RKK Energia 🇷🇺

45-Degree Angle Plate with 5 Holes SMA 627 - 40x134x80 mm

$1.80-7.20

SZ EMI OJSC 🇷🇺

Support Bracket BSO 30-000 for Cable Tray Installation

$3-18

SZ EMI OJSC 🇷🇺

Galvanized Metal Connector for Shelving Systems

$0.18-0.84

VIKA-DVINA LLC 🇷🇺

L-Shaped Connecting Plate for STRUT Profile EZ IEK CLM50D-PLS-090-40

$0.30-1.80

IEK Holding LLC 🇷🇺

Mounting Frame for SPM Series Sockets and Plugs RU-M5

$0.90-3.60

KASKAD OJSC 🇷🇺

Quick-Release Clamps for Round Duct Systems - FCCr

$0.90-8.40

VKO Plant LLC 🇷🇺

Cover Plate for Tray Lid 50 HDZ CLP1S-NK-050-HDZ

$0.30-1.80

IEK Holding LLC 🇷🇺

Installation Frame for SP Series Plugs and Sockets RU-57x27

$0.30-1.80

KASKAD OJSC 🇷🇺

Double Angle Bracket for STRUT Profile

$0.12-0.60

IEK Holding LLC 🇷🇺

Threaded Nut for Motor-Rail Transport 61.ВЕСТ.34.02.002

$0.30-1.80

PROMRESURS LLC 🇷🇺

Cover Plate for Tray Lid 600 HDZ CLP1S-NK-600-HDZ

$0.90-3.60

IEK Holding LLC 🇷🇺

Precision Bolt with Nut for Terminal and Embedded Bolts GOST 16017-2014

$0.90-3.60

MMK-METIZ OJSC 🇷🇺

Threaded Nut M5, M6, M7, M8 - Fastener for Assembly

$0.03-0.24

OSTEOSYNTHESIS LLC 🇷🇺

Screw Support with Flange and Blades Ø57/76mm

$9-48

CESIS OJSC 🇷🇺

Cable Ladder Roof Connector for IEK Systems

$0.60-6

IEK Holding LLC 🇷🇺

Cover Plate for Trench Lid 600 CLP1S-NK-600

$0.90-3.60

IEK Holding LLC 🇷🇺

P-Shape Beam Bracket SMA with Dimensions from 41mm to 122mm

$3-18

SZ EMI OJSC 🇷🇺

120-Degree Countersunk Rivets OСТ 1 34096-80

$0.03-0.60

AVIASERVIS LLC 🇷🇺

Ceiling Mounting Bracket for Metal Trays CLP1Q-050-M-HDZ

$0.30-1.80

IEK Holding LLC 🇷🇺

90° Countersunk Screws with Cross Slot OST 1 31556-80

$0.06-0.60

NORMAL OJSC 🇷🇺

Handrail Mounting Bracket for Passenger Seat L01R35.8202586

$1.50-6

SOTEX OJSC 🇷🇺

Semi-Countersunk Head Bolts OST 1 31195-80, OST 1 31196-80, OST 1 31198-80, OST 1 31200-80, OST 1 31202-80

$0.03-0.60

AVIASERVIS LLC 🇷🇺

Cover Plate for Tray Lid 200 CLP1S-NK-200 IEK

$0.30-1.80

IEK Holding LLC 🇷🇺

Two-Row Cross Rail 412 SMART for Electrical Equipment YKV-RPD-412-450

$0.90-3.60

IEK Holding LLC 🇷🇺

Cylindrical Head Screws OST 1 31515-80

$0.03-0.60

ShMZ LLC 🇷🇺

Galvanized Roof Ridge Cap 200x200

$0.30-1.80

Federal Penitentiary Service IK-12 OUKhD of the Main Directorate of the Federal Penitentiary Service of Russia for the Perm Territory 🇷🇺

Professional Trencher B1-30 for Stone, Brick, and Concrete Cutting IDFR298416001-K1

$72-220

FIOLENT OJSC 🇷🇺

Flanged Hex Bolt M12x130, Grade 10.9 - 1701834000F1

$0.30-1.80

BOLTEN LLC 🇷🇺

Flat-Rounded Head Rivets with Compensator, OST 1 34048-86

$0.03-0.24

AVIASERVIS LLC 🇷🇺

End Fastener for Wooden Sleepers ZSh-1

$0.30-1.80

BEMZ "MAXIMUM" LLC 🇷🇺

Double Perforated Mounting Profile MACU PM 000, 600-1800mm

$1.80-7.20

SZ EMI OJSC 🇷🇺

Reinforced Support Bracket BSOL 50-000 for Cable Trays

$9-42

SZ EMI OJSC 🇷🇺

Lightning Protection Clamp K1-300GTS-02

$1.50-4.80

ELMASHPOM LLC 🇷🇺

Ceiling Mount for STRUT Profile HDZ IEK CLM50D-KPS-41-HDZ

$1.20-6

IEK Holding LLC 🇷🇺

« ‹ 5 6 7 8 9 › »

Industrial Fasteners and Mounting Hardware, from Construction Brackets to Aviation Standards

This is a deep hardware section: 751 positions from 129 manufacturers. The largest blocks serve electrical and mechanical installation — cable brackets and mounts (73), mounting plates (49), general brackets (42), STRUT-type channel systems (20), mounting frames, supports and connectors. Classic threaded fasteners are well represented too: bolts (38), screws (19), rivets (18), nuts (17) and anchors, including self-locking nuts and countersunk rivets manufactured to Russian aviation OST standards — a legacy of an industrial base that still machines fasteners to aerospace tolerances.

Why source fasteners from Russia rather than the usual Asian channels? Two reasons come up consistently. Metallurgy: many positions are made from certified alloy steels such as 30KhGSA, with full material traceability rather than commodity-grade wire. And engineering flexibility: plants are accustomed to producing against drawings and OST or GOST specifications in small and medium series, not only mass commodity runs.

Order sizes: commodity fasteners from carton or pallet quantities; special and drawing-based items from a few hundred pieces.
Traceability: material certificates and batch test reports available, including heat numbers for alloy steel items.
Coatings: electro-zinc, hot-dip galvanised and special finishes depending on series.
Consolidation: mixed pallets across many SKUs are standard for distributor orders.
Dispatch: EXW or FOB St. Petersburg and Novorossiysk; overland to Central Asia in 7–14 days.

List the standards and quantities you buy against, and matching plants will quote within days.

FAQ

•Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?

Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.

•What does material traceability look like for alloy-steel fasteners?

For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.

•Are samples available before a production order?

Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.

•What are realistic lead times for mixed hardware orders?

Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.

•Which corrosion protection options are offered?

Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.

Products — Fasteners & Hardware

Industrial Fasteners and Mounting Hardware, from Construction Brackets to Aviation Standards

FAQ

Search Filter