Fasteners & Hardware

Q: Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?

Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.

Q: What does material traceability look like for alloy-steel fasteners?

For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.

Q: Are samples available before a production order?

Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.

Q: What are realistic lead times for mixed hardware orders?

Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.

Q: Which corrosion protection options are offered?

Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.

STRUT Channel & Mounting Systems

Cable Brackets & Mounts

Other

Cable Trays & Accessories

Cover Plate for 400 HDZ Tray CLP1S-NK-400-HDZ

$0.90-3.60

IEK Holding LLC 🇷🇺

Metal Rack Stand - STM.1 Series

$3-18

BLOCK OJSC 🇷🇺

Steel Eye Bolt with Ring 12mm Galvanized, Model VNT 1184

$1.50-6

VENTO-2M LLC 🇷🇺

Staircase Cable Tray 80x300x3000, 1.2mm LLK1-080-300

$9-30

IEK Holding LLC 🇷🇺

Bolt Support Bracket PPB-65 CP 188-02 (392-002)

$0.90-3.60

LITMASHDETAL OJSC 🇷🇺

Hinge Joint Plate 50mm for Trays CLP1SH-050-M-HDZ

$0.30-1.80

IEK Holding LLC 🇷🇺

UP3-2 Stopper for Precision Applications, Model 667278.00006

$30-180

BCL OJSC 🇷🇺

LESTA Cable Ladder Clamp for Cable Management

$0.18-1.20

IEK Holding LLC 🇷🇺

90-Degree Corner Plate with 3 Holes SMA 622, Stainless Steel

$1.50-6

SZ EMI OJSC 🇷🇺

90-Degree Angle Plate with 6 Holes SMA 618, 80x120mm, 5mm Thick Stainless Steel

$1.80-7.20

SZ EMI OJSC 🇷🇺

45-Degree Angle Plate with 2 Holes SMA 625

$1.20-6

SZ EMI OJSC 🇷🇺

STRUT Console 41x21-500 CLM50D-CSO-41-21-05

$1.50-4.80

IEK Holding LLC 🇷🇺

STRUT Console 41x41-400 CLM50D-CSO-41-41-04

$1.50-4.80

IEK Holding LLC 🇷🇺

Stainless Steel Mounting Bracket CKP 000x00 for Cable Trays

$0.90-6

SZ EMI OJSC 🇷🇺

Metal Housing Mounting Kit for Columns YKK-0-125

$1.50-6

IEK Holding LLC 🇷🇺

Pneumatic Jackhammer MOP-2

$90-300

Triton-Pneumo LLC 🇷🇺

45-Degree Angle Plate with 3 Holes SMA 629

$1.50-4.80

SZ EMI OJSC 🇷🇺

Wall Mounting Bracket for STRUT Profile EZ IEK CLM50D-SKS-050-40

$0.30-1.80

IEK Holding LLC 🇷🇺

STRUT Console 41x21-500 HDZ CLM50D-CSO-41-21-05-HDZ

$1.50-4.80

IEK Holding LLC 🇷🇺

45-Degree Angle Plate with 5 Holes SMA 627, 40x134x80 mm

$1.50-6

SZ EMI OJSC 🇷🇺

BSUR 60 Support Bracket for Enhanced Stability

$0.90-3.60

SZ EMI OJSC 🇷🇺

Wall Bracket for Metal Trays IEK HDZ CLP1-UKK-M-HDZ

$0.90-3.60

IEK Holding LLC 🇷🇺

90-Degree Corner Plate with 6 Holes SMA 618, 80x120mm

$1.50-6

SZ EMI OJSC 🇷🇺

G-Shaped End Support Anchor Device Type A, Art. RC8E

$1,500-4,800

VYOTA-M LLC 🇷🇺

Support Bracket BSO 20-000 for Cable Tray Installation

$3-18

SZ EMI OJSC 🇷🇺

Countersunk Head Screws <90 with Cross Slot OST 1 31552-80

$0.01-0.18

ShMZ LLC 🇷🇺

Through Hook V20-240 for Anchor Fastening

$1.50-4.80

DAZ LLC 🇷🇺

Perforated Cable Tray RPP 700x100x6000

$42-120

SOEMI OJSC 🇷🇺

Intertile Support Stand PMP-40-01 for Increased Installation Area

$90-300

CHUVASHTORGTECHNICA OJSC 🇷🇺

Mechanical Anchor Connection CA2 36

$3-18

RECO LLC 🇷🇺

Aviation Industry Nuts OСТ 1 37004-77

$0.09-0.60

NORMAL OJSC 🇷🇺

Support Bracket BSO 60-000 for Cable Tray Installation

$3-18

SZ EMI OJSC 🇷🇺

Flat-Rounded Head Rivet with Code 704.AC.116

$0.01-0.06

AVIASERVIS LLC 🇷🇺

Stainless Steel Plate 4 Holes SMA 608, 80x124 mm, 5.0 mm Thick

$3-18

SZ EMI OJSC 🇷🇺

Upper Suspension Clamp for Metal Trays 400mm CLP1-SPV-400

$0.90-3.60

IEK Holding LLC 🇷🇺

Angled Mounting Bracket 60° for STRUT-Profile CLM50D-UNS-060-40

$0.30-1.80

IEK Holding LLC 🇷🇺

Vertical Ladder Type Cable Tray KTU-BSI 000x00

$9-60

SZ EMI OJSC 🇷🇺

Cover Plate for Tray Lid 50 CLP1S-NK-050 IEK

$0.30-1.80

IEK Holding LLC 🇷🇺

Mounting Traverse MG 80.04 CL

$1.20-6

PROVENTO LLC 🇷🇺

IP65 Mounting Kit for Safe Circuit Installation TIS 34.1.3.90.000-02

$90-420

URALTECHIS LLC 🇷🇺

Fasteners and Screws for Structural Assembly

$0.06-1.20

TULATOCHMAS OJSC 🇷🇺

Low Hexagonal Slot Nuts for Aviation Industry, OST 1 33050-80

$0.30-2.40

NORMAL OJSC 🇷🇺

Joint Connection Plate for Trays, 100mm, Model CLP1SH-100-M-HDZ

$0.90-3.60

IEK Holding LLC 🇷🇺

BFO 10-000 Console for Cable Tray Installation

$1.80-9.60

SZ EMI OJSC 🇷🇺

Countersunk Screws OСТ 1 31551-80

$0.03-0.60

AVIASERVIS LLC 🇷🇺

High Shear Resistance Rivets with Hexagonal Head for One-Sided Riveting OST 1 11200-73

$0.06-0.60

RAM LLC 🇷🇺

Self-Tapping Half-Round Head Screws for Aviation Industry OST 1 31586-2006

$0.03-0.24

NORMAL OJSC 🇷🇺

SM-F4 Stainless Steel Support Bracket

$9-36

SZ EMI OJSC 🇷🇺

« ‹ 12 13 14 15 16 › »

Industrial Fasteners and Mounting Hardware, from Construction Brackets to Aviation Standards

This is a deep hardware section: 751 positions from 129 manufacturers. The largest blocks serve electrical and mechanical installation — cable brackets and mounts (73), mounting plates (49), general brackets (42), STRUT-type channel systems (20), mounting frames, supports and connectors. Classic threaded fasteners are well represented too: bolts (38), screws (19), rivets (18), nuts (17) and anchors, including self-locking nuts and countersunk rivets manufactured to Russian aviation OST standards — a legacy of an industrial base that still machines fasteners to aerospace tolerances.

Why source fasteners from Russia rather than the usual Asian channels? Two reasons come up consistently. Metallurgy: many positions are made from certified alloy steels such as 30KhGSA, with full material traceability rather than commodity-grade wire. And engineering flexibility: plants are accustomed to producing against drawings and OST or GOST specifications in small and medium series, not only mass commodity runs.

Order sizes: commodity fasteners from carton or pallet quantities; special and drawing-based items from a few hundred pieces.
Traceability: material certificates and batch test reports available, including heat numbers for alloy steel items.
Coatings: electro-zinc, hot-dip galvanised and special finishes depending on series.
Consolidation: mixed pallets across many SKUs are standard for distributor orders.
Dispatch: EXW or FOB St. Petersburg and Novorossiysk; overland to Central Asia in 7–14 days.

List the standards and quantities you buy against, and matching plants will quote within days.

FAQ

•Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?

Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.

•What does material traceability look like for alloy-steel fasteners?

For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.

•Are samples available before a production order?

Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.

•What are realistic lead times for mixed hardware orders?

Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.

•Which corrosion protection options are offered?

Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.

Products — Fasteners & Hardware

Industrial Fasteners and Mounting Hardware, from Construction Brackets to Aviation Standards

FAQ

Search Filter