Калкан корпустары
Металл калкан корпустары
Бөлүштүрүү жана туташтыруу кутучалары
Кронштейндер
Пластик бокстор
Кириш-бөлүштүрүү түзмөктөрү
Клемма кутучалары
Эсеп жана кабат калкан корпустары
Калкан аксессуарлары
Жол жана кабель кутучалары
Шинопроводдор
Изоляторлор
Текче аксессуарлары
Кабель уюштургучтары
Кичине корпустар
Текче капкактары
Шаты кабель текчелери
Түз кабель текчелери
Бурчтуу кабель текчелери
Текченин бурулуштары
Профилдер жана ДИН-рейкалар
Башка
Товарлар — Корпустар жана бекемдөөлөр
CPV41-0-45-050-600 ESCA Бурчук жумшак 45 градус тип В20 50х600мм IEK
сом 130.50-417.60
IEK Holding LLC 🇷🇺
CPG01-0-45-100-400-HDZ Бурчук жумшак 45 градус тип Г01 ESCA 100х400мм HDZ IEK
сом 156.60-522
IEK Holding LLC 🇷🇺
CPG01-0-90-100-600 ESCA Жумшак бурулуш 90 градус тип Г01 100х600мм IEK
сом 783-2,610
IEK Holding LLC 🇷🇺
CPG01-0-45-100-300-HDZ Жумшак бурулуш 45град Г01 түрү ESCA 100х300мм HDZ IEK
сом 130.50-417.60
IEK Holding LLC 🇷🇺
CKR01-0-050-150-HDZ Крестовина жумшак тип Г01 ESCA 50х150мм HDZ IEK
сом 261-835.20
IEK Holding LLC 🇷🇺
CLM50D-PPZ-200-25-HDZ Перфорация Z-түрүндөгү профиль 2000-2,5 HDZ IEK
сом 104.40-365.40
IEK Holding LLC 🇷🇺
Cross-shaped G-shaped Tray ONL 000x000 GX, Dimensions 100x40mm to 600x110mm
сом 261-1,566
SZ EMI OJSC 🇷🇺
CLM50D-PPP-240-15-HDZ Перфорация профили П-образный 2400-1,5 HDZ IEK
сом 156.60-522
IEK Holding LLC 🇷🇺
Бурчук бурчук вертикалдуу тышкы 45 градус ONL 000x000 V45, өлчөмдөрү 100x40 мм ден 600x200 мм ге чейин, калыңдыгы
сом 261-1,566
SZ EMI OJSC 🇷🇺
Уголдук лоток бөлгүч лестница тибиндеги LL 000 RLU, өлчөмдөрү 30х1200 мм ден 180х1200 мм ге чейин, калыңдыгы 1,2
сом 104.40-1,566
SZ EMI OJSC 🇷🇺
Бурчук вертикалдуу 90º солго ONL 000x000 DL, өлчөмдөрү 100x40 мм ден 600x200 мм ге чейин, калыңдыгы
сом 261-2,610
SZ EMI OJSC 🇷🇺
Бурчук бурчук вертикалдуу ылдый солго ONL 000x000 DL, өлчөмдөрү 100x40 мм ден 600x200 мм ге чейин, калыңдыгы
сом 261-2,610
SZ EMI OJSC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.