Корпусҳои сипарӣ
Корпусҳои сипарии металлӣ
Қуттиҳои тақсимӣ
Кронштейнҳо
Қуттиҳои пластикӣ
Дастгоҳҳои воридотию тақсимотӣ
Қуттиҳои клеммӣ
Корпусҳои сипари ҳисобӣ
Лавозимоти сипарӣ
Қуттиҳои роҳ ва кабел
Шинопроводҳо
Изоляторҳо
Лавозимоти лоткҳо
Каналҳои кабелӣ
Корпусҳои хурдҳаҷм
Сарпӯши лоткҳо
Лоткҳои кабелии нардбонӣ
Лоткҳои кабелии рост
Лоткҳои кунҷӣ
Гардишҳои лоткҳо
Профилҳо ва ДИН-рейкаҳо
Дигар
Маҳсулот — Корпусҳо ва бастагуҳо
CPV41-0-45-050-600 ESCA Гардиши нарм 45дараҷа навъи В20 50х600мм IEK
сом. 16.35-52.32
IEK Holding LLC 🇷🇺
CPG01-0-45-100-400-HDZ Гардиши нарм 45дараҷа навъи Г01 ESCA 100х400мм HDZ IEK
сом. 19.62-65.40
IEK Holding LLC 🇷🇺
CPG01-0-90-100-600 ESCA Гардиши нарм 90дараҷа навъи Г01 100х600мм IEK
сом. 98.10-327
IEK Holding LLC 🇷🇺
CLP1V-035-100-1 ESCA Гардиши амудии дарунии 90дараҷа 35х100мм IEK
сом. 9.81-39.24
IEK Holding LLC 🇷🇺
CLP3N-100-500 ESCA Гардиши амудии берунии 45дараҷа 100х500мм IEK
сом. 32.70-196.20
IEK Holding LLC 🇷🇺
CPG01-0-45-100-300-HDZ Гардиши нарм 45дараҷа навъи Г01 ESCA 100х300мм HDZ IEK
сом. 16.35-52.32
IEK Holding LLC 🇷🇺
CKR01-0-050-150-HDZ Krestovina plavnaya tip G01 ESCA 50x150mm HDZ IEK
сом. 32.70-104.64
IEK Holding LLC 🇷🇺
CLM50D-PPZ-200-25-HDZ Профили перфорированный Z-образный 2000-2,5 HDZ IEK
сом. 13.08-45.78
IEK Holding LLC 🇷🇺
Cross-shaped G-shaped Tray ONL 000x000 GX, Dimensions 100x40mm to 600x110mm
сом. 32.70-196.20
SZ EMI OJSC 🇷🇺
CLM50D-PPP-240-15-HDZ Профили перфорасионӣ П-шакил 2400-1,5 HDZ IEK
сом. 19.62-65.40
IEK Holding LLC 🇷🇺
Фарқкунандаи кунҷии лотокҳои пӯшида LL 000 RLU, бо андозаҳои умумӣ аз 30х1200 мм то 180х1200 мм, бо ғафсии аз 1,2
сом. 13.08-196.20
SZ EMI OJSC 🇷🇺
CKR01-0-050-100-HDZ Krestovina plavnaya tip G01 ESCA 50x100mm HDZ IEK
сом. 19.62-65.40
IEK Holding LLC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.