Тауарлар — Металл илемдеу
Mobile Workshops for Repair and Testing of Pipeline Valves PKTBA-MM
₸42,750,000-142,500,000
PKTBA CJSC 🇷🇺
Evaporator Column Deethanization Unit Block 300И-1/1 BIKD-4.0
₸4,275,000-17,100,000
KURGANHIMMASH LLC 🇷🇺
Vacuum-formed Decorative Profile for Vehicle Cladding 5299-372-5403129
₸142.50-1,140
AVTOPLAST LLC 🇷🇺
Post your Buy Requirement
Get Quotes from Verified Suppliers
Уақытыңызды үнемдеңіз
Metal Soft Bottle Dispenser Safe and Care 2000 (1000) ml LB-31-139-RUS
₸7,125-28,500
RBR TRADE LLC 🇷🇺
Vacuum-formed Decorative Profile for Vehicle Cladding 5299-351-5403117
₸427.50-1,710
AVTOPLAST LLC 🇷🇺
Most Popular
in Металл илемдеу
284+ Products
1
2
3
Meat Semi-Finished Products (Cutlets) - GOST 32951-2014
₸570-2,280
FC KP-14 UFSIIN of Russia in the Republic of Mordovia 🇷🇺
Frozen Fish Patties - Semi-Finished Seafood Products
₸570-1,995
FSIN IK-18 of the Yamalo-Nenets Autonomous Okrug 🇷🇺
Hot-Rolled Alloy Flat Steel Coil 600mm Width with Patterned Surface
₸228,000-855,000
PJSC SEVERSTAL 🇷🇺
Square Casting Blank in Low Alloy Steel, Carbon <0.25%, Max 130mm Side
₸199,500-855,000
PJSC SEVERSTAL 🇷🇺
Hot-Rolled Square Billet 60-220mm in Corrosion-Resistant and Heat-Resistant Steel
₸228,000-855,000
METALLURGICAL PLANT "PETROSTAL" OJSC 🇷🇺
Structural Aluminum Alloy Sheet AD1 for High-Quality Metal Constructions
₸4,275-28,500
MOST-1 LLC 🇷🇺
Steel Pipes with Corrosion-Resistant Coating for Enhanced Durability 57-1020 mm
₸4,275-28,500
PIK LLC 🇷🇺
Hot-Bent Steel Pipe Bends for High-Pressure Applications DN 50-1400
₸142,500-2,850,000
LISKIMONTAZHKONSTRUKTSIYA OJSC 🇷🇺
FAQ
•How do GOST steel grades correspond to EN and ASTM grades?
Published equivalence tables cover the common structural range: St3sp corresponds approximately to S235, 09G2S to S355 in many applications, and alloy grades have ASTM near-equivalents. Because matches are approximate, suppliers provide the chemical composition and mechanical properties from mill certificates so your engineer confirms suitability rather than relying on the name alone.
•What is the minimum tonnage worth shipping?
For commodity rolled product, 20 tonnes — one container or truck — is the practical floor per position, and vessel parcels of 500–3,000 tonnes get mill-direct pricing. Fabricated structures are different: a single bridge section or a set of galvanised columns can justify shipment because value per tonne is higher.
•Can plants fabricate structures to Eurocode or AISC project drawings?
Yes, fabrication shops work from your drawings regardless of the design code, since cutting, welding and drilling follow the geometry and weld specifications you provide. Welder certification and weld inspection protocols are issued per Russian standards; if your project requires specific NDT coverage or third-party inspection, write it into the contract.
•Is hot-dip galvanising available, and to what standard?
Most fabricators either operate or partner with galvanising lines running to GOST 9.307, which is harmonised with ISO 1461 in coating thickness requirements. Specify the design life or coating microns you need; typical structural coatings run 60–100 microns. Coating thickness measurement protocols ship with the goods.
•How is mixed steel cargo loaded — containers or breakbulk?
Bars, profiles and sheet up to 11.8 metres fit 40-foot containers; longer beams and large fabrications travel breakbulk or on flat-racks. Suppliers and forwarders decide per cargo list, balancing handling damage risk against freight cost. For Central Asia, open rail wagons are usually the cheapest route for long product.