Тауарлар — Металл илемдеу
Wrought Iron Fence Component - Decorative Metal Part
₸14,250-85,500
Federal Penitentiary Service IK-25 of the Irkutsk Region 🇷🇺
Steel Trusses for Construction - Structural Metal Parts
₸1,425,000-11,400,000
PSK ALYANS AGRO LLC 🇷🇺
Single Profile SMUP 41x61 with Variable Dimensions 41x61x200 to 41x61x6000 mm
₸1,425-8,550
SZ EMI OJSC 🇷🇺
U-Shaped Suspended Profile BSUF 8K-00, Size 85x50x200 mm to 85x50x2000 mm, 4.0 mm Thickness
₸2,850-14,250
SZ EMI OJSC 🇷🇺
Window Sill Profile for Exterior and Interior Cladding - Model 6241-03-5403118
₸427.50-1,710
AVTOPLAST LLC 🇷🇺
Heavy-Duty Beam S100 (T250) with Locking Mechanisms (2700, Orange Paint 2004)
₸42,750-142,500
MEDVED LLC 🇷🇺
Protective Plugs for SMUP Profiles 41x21, 41x41, 41x41D, 41x61, 41x61D - Polyethylene
₸28.50-285
SZ EMI OJSC 🇷🇺
U-shaped Suspended Profile BSUF 5/13-000 (50x50x200 mm to 50x50x6000 mm)
₸1,425-8,550
SZ EMI OJSC 🇷🇺
Wrought Iron Fence Manufacturing Services
₸42,750-285,000
Federal Penitentiary Service IK-25 of the Irkutsk Region 🇷🇺
Double Profile SMUP 41x41x00D with Dimensions 41x82x200 mm to 41x82x6000 mm
₸1,425-8,550
SZ EMI OJSC 🇷🇺
U-Profile BSUP 10K-000, Dimensions 100x50x200 mm to 100x50x6000 mm, 4 mm Thickness, Hot-Dip Galvanized
₸855-3,420
SZ EMI OJSC 🇷🇺
U-shaped Suspended Profile BSUF 7-000, Sizes from 70x50x200 mm to 70x50x2000 mm, Metal Thickness 3.0 mm
₸1,425-8,550
SZ EMI OJSC 🇷🇺
U-Shaped Profile BSUP 10-000, Sizes: 100x50x200mm to 100x50x6000mm, Metal Thickness: 4.0mm, Hot-Dip Galvanized
₸4,275-14,250
SZ EMI OJSC 🇷🇺
Decorative Wrought Iron Fence 300x400x120 CM
₸42,750-171,000
FSIN IK-8 of the Republic of Buryatia 🇷🇺
FAQ
•How do GOST steel grades correspond to EN and ASTM grades?
Published equivalence tables cover the common structural range: St3sp corresponds approximately to S235, 09G2S to S355 in many applications, and alloy grades have ASTM near-equivalents. Because matches are approximate, suppliers provide the chemical composition and mechanical properties from mill certificates so your engineer confirms suitability rather than relying on the name alone.
•What is the minimum tonnage worth shipping?
For commodity rolled product, 20 tonnes — one container or truck — is the practical floor per position, and vessel parcels of 500–3,000 tonnes get mill-direct pricing. Fabricated structures are different: a single bridge section or a set of galvanised columns can justify shipment because value per tonne is higher.
•Can plants fabricate structures to Eurocode or AISC project drawings?
Yes, fabrication shops work from your drawings regardless of the design code, since cutting, welding and drilling follow the geometry and weld specifications you provide. Welder certification and weld inspection protocols are issued per Russian standards; if your project requires specific NDT coverage or third-party inspection, write it into the contract.
•Is hot-dip galvanising available, and to what standard?
Most fabricators either operate or partner with galvanising lines running to GOST 9.307, which is harmonised with ISO 1461 in coating thickness requirements. Specify the design life or coating microns you need; typical structural coatings run 60–100 microns. Coating thickness measurement protocols ship with the goods.
•How is mixed steel cargo loaded — containers or breakbulk?
Bars, profiles and sheet up to 11.8 metres fit 40-foot containers; longer beams and large fabrications travel breakbulk or on flat-racks. Suppliers and forwarders decide per cargo list, balancing handling damage risk against freight cost. For Central Asia, open rail wagons are usually the cheapest route for long product.