Measuring range
1.41 ...141 m/s2 (vibration acceleration amplitudes)
Consumption current
< 200 mA
Operating temperature range
-40...70 °C
Consumption current
4 ... 20 mA
Parameters of built-in comparators
2 ...100 m/s² (thresholds for vibration acceleration) | 3 ...141 m/s² (thresholds for vibration amplitude) | 1 m/s² (step for vibration thresholds) | 2 ...40 mm/s (thresholds)
Input/output connectors
screw terminal blocks
Measurement error in the operating temperature range
±2 %
Types of connected vibration transducers
charge
Data exchange in the information system
RS485
Dry contacts: for control of vibration velocity and vibration acceleration
AL1, AL2
Conditions of signaling (closed or open) of relay contacts "AL1", "AL2"
Continuous exceeding of the informative signal of the set threshold value for 0-9 s
Power supply voltage
0...5 V
Mode of operation of relay contacts
blocking/self-recovery
Self-recovery condition
6% reduction in vibration from activation threshold
Delay of vibration control after establishing operation mode/self-recovery
0 or 20
Dry contact parameters
<0.15 A (switching current)
Open collector contact parameters
<20 mA (DC Ic)
Digital code output parameters
12 (number of code digits for measurement result)
Information displayed on the built-in display
vibration velocity and acceleration, amplitude of vibration velocity and acceleration, sensor conversion coefficient, set threshold values, threshold exceed time setting, relay contact status (dry contacts and open collector)
Supply voltage (±10 %)
18...30 V
Operating frequency range of measured vibration velocity and vibration acceleration (frequency response non-uniformity ± 1 dB)
30...400
Step of setting the time of exceeding the vibration velocity threshold values
1