Товарлар — Фурнитура жана топтомдоочулары
Luxury Kitchen Cabinet Facade with 2 Drawers 600 in Glossy White/Black - Sherwood LD.281140.000
сом 1,305-4,176
ALMAZ LLC 🇷🇺
Post your Buy Requirement
Get Quotes from Verified Suppliers
Убакытты үнөмдөңүз
Lux Kitchen Cabinet Facade 600mm with 3 Drawers - Sherwood LD.281130.000
сом 1,827-5,220
ALMAZ LLC 🇷🇺
Mocha LD.274970.000 Kitchen Cabinet End Panel 722mm (Anthracite Textured Oak)
сом 783-2,610
ALMAZ LLC 🇷🇺
Most Popular
in Фурнитура жана топтомдоочулары
1,240+ Products
1
2
3
Kitchen Cabinet End Panel 722mm (Topaz Madeira Oak) - INDIGO LD.298900.000
сом 261-1,566
ALMAZ LLC 🇷🇺
High Corner Cabinet Facade Door with Carved Panel - Country LD 245250.000
сом 2,349-7,308
ALMAZ LLC 🇷🇺
Sherwood LD.281160.000 Kitchen Cabinet Facade 800 with 2 Drawers LUX (White Gloss/Black)
сом 1,827-5,220
ALMAZ LLC 🇷🇺
High-Quality 500mm Facade Door Type 1 (Alabaster) - Marina LD.273090.000
сом 1,305-4,176
ALMAZ LLC 🇷🇺
FAQ
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.