Товарлар — Фурнитура жана топтомдоочулары
Ameli LД.251190.000 Right Facade Door for 500mm Cabinet (Provencal Oak)
сом 1,305-4,176
ALMAZ LLC 🇷🇺
Country LD 245280.000 Door for 600mm Cabinet Above Extractor (Panel Design)
сом 1,305-4,176
ALMAZ LLC 🇷🇺
Luxurious Kitchen Cabinet Facade with 2 Drawers 600mm, Model LD.281140.000
сом 1,305-4,176
ALMAZ LLC 🇷🇺
Light Oak Kitchen Base Cabinet Front Complete Set with 2 Drawers (Model: Italy LD.275150.000)
сом 1,305-4,176
ALMAZ LLC 🇷🇺
Durable Tabletop Model SL 02 for Residential and Commercial Use
сом 1,566-20,880
IP Andreev Dmitry Ivanovich 🇷🇺
Ameli LD.251740.000 Facade Set for Kitchen Base Unit 500 with 2 Drawers LUX
сом 1,827-5,220
ALMAZ LLC 🇷🇺
Kitchen Cabinet Facade Set with 3 Drawers 800mm - Vinchenza LD.234850.000
сом 1,566-5,220
ALMAZ LLC 🇷🇺
Anastasia Type 3 809 Facade (White, Direct Milling with Pattern, Handle Included)
сом 1,305-4,176
ALMAZ LLC 🇷🇺
FAQ
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.