Товарлар — Фурнитура жана топтомдоочулары
Kitchen Cabinet Front Set with 2 Drawers for 500mm Unit - Mokka LD.274120.000
сом 1,305-4,176
ALMAZ LLC 🇷🇺
Kitchen Cabinet Facade Set Marina LD.273190.000 with 3 Drawers (Alabaster)
сом 1,827-5,220
ALMAZ LLC 🇷🇺
Gelato LD.241820.000 Luxury Kitchen Cabinet Facade Kit with 2 Drawers in Onyx Gray
сом 2,610-8,352
ALMAZ LLC 🇷🇺
Kitchen Cabinet Facade Set with 3 Drawers in Kashmir - Model LD.274190.000
сом 1,305-4,176
ALMAZ LLC 🇷🇺
Kitchen Cabinet Front Set 400mm with 3 Drawers (Mokka LD.274110.000, Kashmir)
сом 1,305-4,176
ALMAZ LLC 🇷🇺
Bianca LD.271290.000 High Cabinet Door Set for 600mm Kitchen with Oven (Kashmir)
сом 3,654-13,050
ALMAZ LLC 🇷🇺
Decorative Facade Panel for Corner Table (Textured Anthracite Oak) - LD.285630.000
сом 130.50-522
ALMAZ LLC 🇷🇺
FAQ
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.