Товарлар — Корпустар жана бекемдөөлөр

Distribution Cabinet for Electrical Energy Management - Series ЩР

Distribution Cabinet for Electrical Energy Management - Series ЩР

сом 1,566-8,352
Center Energy LLC 🇷🇺
Шит өз муктаждыктары үчүн ШММ

Шит өз муктаждыктары үчүн ШММ

сом 261,000-1,566,000
EKRA LLC 🇷🇺
Vvodno-raspredelitel'nye ustroystva tipa VRU TU 3434-010-33874352-2015

Vvodno-raspredelitel'nye ustroystva tipa VRU TU 3434-010-33874352-2015

сом 15,660-156,600
KazanElektroshchit LLC 🇷🇺
MKP82-N-12-41-10 Бокс ЩРН-П-12 модулей IP41 PRIME

MKP82-N-12-41-10 Бокс ЩРН-П-12 модулей IP41 PRIME

сом 783-2,610
IEK Holding LLC 🇷🇺
Бокс ЩРВ-П-36 GENERICA модульный

Бокс ЩРВ-П-36 GENERICA модульный

сом 522-1,566
IEK Holding LLC 🇷🇺
Корпус пластиковый IEK IP41 черный

Корпус пластиковый IEK IP41 черный

сом 783-2,610
IEK Holding LLC 🇷🇺
Модульный корпус KREPTA 3 до 400В

Модульный корпус KREPTA 3 до 400В

сом 261-1,566
IEK Holding LLC 🇷🇺
Корпус пластиковый IEK IP41 белый

Корпус пластиковый IEK IP41 белый

сом 156.60-730.80
IEK Holding LLC 🇷🇺
Корпус пластиковый IEK IP41

Корпус пластиковый IEK IP41

сом 783-2,610
IEK Holding LLC 🇷🇺
Корпус пластиковый IEK IP41 белый

Корпус пластиковый IEK IP41 белый

сом 156.60-626.40
IEK Holding LLC 🇷🇺
Корпус пластиковый IEK IP41 черный

Корпус пластиковый IEK IP41 черный

сом 156.60-626.40
IEK Holding LLC 🇷🇺
MKP72-N3-36-55 KREPTA 5 Пластиковый корпус IP55

MKP72-N3-36-55 KREPTA 5 Пластиковый корпус IP55

сом 783-2,610
IEK Holding LLC 🇷🇺
Пластиковый корпус IEK IP41

Пластиковый корпус IEK IP41

сом 156.60-522
IEK Holding LLC 🇷🇺
Пластиковый корпус KREPTA IP41 24 модуля

Пластиковый корпус KREPTA IP41 24 модуля

сом 783-2,610
IEK Holding LLC 🇷🇺
Корпус пластиковый IEK IP30

Корпус пластиковый IEK IP30

сом 156.60-522
IEK Holding LLC 🇷🇺
Бокс GENERICA IP41 для модульных устройств

Бокс GENERICA IP41 для модульных устройств

сом 261-1,044
IEK Holding LLC 🇷🇺
Монтаждык шкаф Mastermann пластик серия 1

Монтаждык шкаф Mastermann пластик серия 1

сом 2,610-15,660
TELECOM-MASTER LLC 🇷🇺

FAQ

Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.