Калкан корпустары
Металл калкан корпустары
Бөлүштүрүү жана туташтыруу кутучалары
Кронштейндер
Пластик бокстор
Кириш-бөлүштүрүү түзмөктөрү
Клемма кутучалары
Эсеп жана кабат калкан корпустары
Калкан аксессуарлары
Жол жана кабель кутучалары
Шинопроводдор
Изоляторлор
Текче аксессуарлары
Кабель уюштургучтары
Кичине корпустар
Текче капкактары
Шаты кабель текчелери
Түз кабель текчелери
Бурчтуу кабель текчелери
Текченин бурулуштары
Профилдер жана ДИН-рейкалар
Башка
Товарлар — Корпустар жана бекемдөөлөр
Cable Organizer MiK 1U 19” (5 Rings 38x55mm)
сом 522-2,610
METALLOIZDELIYA I KOMPLEKTUYUSCHIE LLC 🇷🇺
CO05-1M4R-LWS ITK Кабель уюштуруучу 10" 1U 4 шакек үчүн шкаф 10" LINEA WS кара
сом 156.60-626.40
IEK Holding LLC 🇷🇺
NT маркасындагы аксессуарлар: NT CO-VO сериясындагы кабель уюштуруучу
сом 783-3,132
SITRI INDUSTRY LLC 🇷🇺
C3 Solutions соода аксессуарлары: C3.OН серия горизонтал кабель уюштуруучулары
сом 156.60-626.40
SITRI SOLUTIONS LLC 🇷🇺
CO05-2M6R ITK Кабельдик уюштуруучу 2U 2 жаны горизонталдуу жана 4 вертикалдуу шакек, кара
сом 783-2,610
IEK Holding LLC 🇷🇺
CO35-1M6R ITK Кабельдик уюштуруу 1U 2 бока горизонталдуу жана 4 вертикалдуу шакек, сиви
сом 417.60-1,566
IEK Holding LLC 🇷🇺
NT маркасындагы аксессуарлар: NT CO сериясындагы кабель уюштуруучу
сом 26.10-156.60
SITRI INDUSTRY LLC 🇷🇺
CO05-1M6R ITK Кабельдик уюштуруучу 1U 2 жаны горизонталдуу жана 4 вертикалдуу шакек, кара
сом 783-2,610
IEK Holding LLC 🇷🇺
NT маркасынын аксессуарлары: NT CO-H сериясынын кабель уюштуруучусу
сом 104.40-522
SITRI INDUSTRY LLC 🇷🇺
CO35-2M6R ITK Кабельдик уюштуруучу 2U 2 бока горизонталдуу жана 4 вертикалдуу шакектер, сиви
сом 783-2,610
IEK Holding LLC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.