Калкан корпустары
Металл калкан корпустары
Бөлүштүрүү жана туташтыруу кутучалары
Кронштейндер
Пластик бокстор
Кириш-бөлүштүрүү түзмөктөрү
Клемма кутучалары
Эсеп жана кабат калкан корпустары
Калкан аксессуарлары
Жол жана кабель кутучалары
Шинопроводдор
Изоляторлор
Текче аксессуарлары
Кабель уюштургучтары
Кичине корпустар
Текче капкактары
Шаты кабель текчелери
Түз кабель текчелери
Бурчтуу кабель текчелери
Текченин бурулуштары
Профилдер жана ДИН-рейкалар
Башка
Товарлар — Корпустар жана бекемдөөлөр
CPG04-4-90-100-300-HDZ Бурчук баскыч LESTA 90 градус 100х300мм R300 HDZ IEK
сом 783-2,610
IEK Holding LLC 🇷🇺
CLM40-150-600-3-150-HDZ Лестничный лоток LESTA 150х600х3000-1,5 HDZ IEK
сом 783-2,610
IEK Holding LLC 🇷🇺
Horizontal 60-Degree Self-Supporting Cable Tray Corner Cover KLY 000 U60
сом 261-3,132
SZ EMI OJSC 🇷🇺
Крышка радиусная угла горизонтального 45 градусов самонесущего кабельроста KLI 000 U45
сом 261-2,088
SZ EMI OJSC 🇷🇺
45-Degree Horizontal Corner Cover for Self-Supporting Cable Tray KLY 000 U45
сом 261-2,610
SZ EMI OJSC 🇷🇺
Vertical 90-Degree Internal Corner Cover for Self-Supporting Cable Trays KLY 000 F90
сом 261-1,566
SZ EMI OJSC 🇷🇺
90 градускадагы Г образдуу ички вертикалдуу бурчтук капкагы KL 000 GF90, өлчөмдөрү 50 мм ден 600 мм ге чейин
сом 78.30-1,566
SZ EMI OJSC 🇷🇺
Горизонталдык 30 градус самонесущий кабельросттун бурчугу KLY 000 U30
сом 104.40-1,566
SZ EMI OJSC 🇷🇺
90 градуска Гобраздуу ички вертикалдык бурчтук капкагы KL 000 GF90, өлчөмдөрү 50 мм ден 600 м ге чейин
сом 78.30-522
SZ EMI OJSC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.