STRUT-профиль жана монтаж системалары
Анкерлер
Болттар
Бурамалар
Гайкалар
Жер анкерлери
Кысмалар
Заклёпкалар
Болот аркандар
Монтаждык бекиткичтер
Кронштейндер
Кабелдик кронштейндер
Башкалар
Кабелдик науалар жана аксессуарлар
Монтаждык таянычтар
Монтаждык пластиналар
Монтаждык алкактар
Аралыктоочулар
Монтаждык рейкалар
Скобалар
Монтаждык туташтыргычтар
Бекитүүчү бурчтуктар
Жыгач бурандалары
Товарлар — Илгичтер жана жабдыктар
Pneumatic Riveting Clamp for Steel, Titanium, and Aluminum - SKP1303.50.74.30
сом 13,050-46,980
POLIDEX LLC 🇷🇺
Self-Locking Two-Ear Nuts Made of Black Metals OST 1 33072-80
сом 5.22-52.20
FIRST FASTENER PLANT LLC 🇷🇺
Titanium Anode Grounding Rods AZ-TES with MMO Coating, 32mm Diameter, Complete Set
сом 78,300-261,000
TECHENERGOSNAB LLC 🇷🇺
Reduced Countersunk Head Rivets 91° with Reduced Compensator for Automatic Riveting
сом 5.22-52.20
RAM LLC 🇷🇺
M20x45 Cylindrical Head Screw with Star Socket T100, Code 2702877000F1
сом 104.40-365.40
BOLTEN LLC 🇷🇺
Low Hex Nuts from Titanium Alloy for Aerospace Industry OST 1 12140-78
сом 26.10-208.80
NORMAL OJSC 🇷🇺
Metal Waste Container 0.75 m³ for Solid Waste Collection
сом 7,830-26,100
IK-1 FSIN of Russia in Voronezh Oblast 🇷🇺
Seamless Waste Collection Container for Solid Waste - TBO-1100-1.5-R-C-Z-2V-200-1570+2D-200-1570-BKr-M-Z
сом 13,050-36,540
BLOCK OJSC 🇷🇺
Steel Strap Fastening Clamp with Teeth for SIP Installation C 20
сом 5.22-31.32
PRODUCTION GROUP LLC 🇷🇺
Metal U-Profile for Cell Suspension - ESD Compatible, UNIVERSAL
сом 104.40-522
UNIVERSAL PRIBOR LLC 🇷🇺
FAQ
•Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?
Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.
•What does material traceability look like for alloy-steel fasteners?
For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.
•Are samples available before a production order?
Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.
•What are realistic lead times for mixed hardware orders?
Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.
•Which corrosion protection options are offered?
Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.