Товарлар — Жасалгалоо жана фасад материалдары
Concentrated Water Solution for Wood Protection I Gr. BB-11 GOST 28815-2018 with Indicator
сом 522-1,566
EMPILS CJSC 🇷🇺
Premium Anti-Corrosion Epoxy Zinc Phosphate Coating GREMI-RUST
сом 783-3,132
LAKOKRASPOKRYTIE LLC 🇷🇺
Flexible Two-Component Polyurethane Compound for Cold Curing ADVAFORM Mark 30
сом 261-2,088
ADGESIV LLC 🇷🇺
Two-Component Injection Resin for Long-Lasting Elastic Waterproofing PoliGrund R 2K-LV
сом 1,305-5,220
GANTGRUND LLC 🇷🇺
High-Temperature Plasticizer for Plastics and Elastomers Oxaplast
сом 52.20-522
PJSC Nizhnekamskneftekhim 🇷🇺
Precast Concrete Floor Slab for Structural Support PK42-12-8t
сом 78.30-313.20
STROYINDUSTRIYA LLC 🇷🇺
Heavy-Duty Concrete Mixture for Strength Class B20, Workability P4, Frost Resistance F100, Water Resistance W4
сом 2,088-6,264
ZHELEZOBEON-STRONEG LLC 🇷🇺
FAQ
•Will these coatings perform in hot and humid climates?
Most facade paints and protective compounds in this section are formulated for severe continental conditions and carry UV and moisture resistance data in their technical sheets. For tropical coastal use, ask the manufacturer to confirm performance against your humidity and salt-spray requirements; several plants adjust formulations for specific export climates.
•What shelf life do paints and treatments have for sea shipment?
Water-dispersion paints typically carry 12–24 months shelf life, solvent-based and silicate products up to 24–36 months in unopened factory packaging. A sea voyage of 30–45 days is not a problem if cargo avoids freezing; suppliers mark temperature limits on each pallet and can schedule shipments around extreme seasons.
•Can I get fire-protection certificates recognised in my country?
Products ship with Russian fire-efficiency test reports and GOST conformity documents stating flame-spread group and treatment class. These are usually sufficient for tender pre-qualification, but final acceptance depends on your national regulator. Manufacturers can support local re-certification by providing formulation data and additional test samples.
•Is private-label production available for distributors?
Yes, this is common practice for paints, primers, wood treatments and rust converters. Typical thresholds start around one tonne per SKU per filling run. The factory prints your label artwork, while the certificate of conformity continues to reference the manufacturing plant, which keeps documentation legitimate.
•How are decorative mouldings and cornices packed for export?
Long profiles are wrapped individually, boxed and strapped to custom-length pallets or packed in plywood crates for sea freight. Breakage allowances of 2–3 percent are normally written into the contract for gypsum and polymer decorative elements, and suppliers add spare pieces to cover transit damage.