Тауарлар — Сантехника және құбыр арматурасы
Steel Slide Gate Valve with Hydraulic Drive ZSHG
₸712,500-2,280,000
Technovek Oil and Gas Equipment Plant LLC 🇷🇺
LD Pride Brass Ball Valve M20 GAS 44.15.V-B.V.M.R for Liquid and Gas Control
₸855-4,560
LD PRIDE LLC 🇷🇺
Bottom Valve A3217FR160 for Aggressive Liquids and Gases
₸14,250-85,500
Cheboksary Enterprise "Sespel" CJSC 🇷🇺
Automatic Water Mixer with Temperature Control KR5147V-DC
₸42,750-142,500
Kopfgescheit LLC RUSSIA 🇷🇺
Steel Ball Valve with Polyurethane Thermal Insulation 32-1420mm
₸142,500-8,550,000
POLYMERSTROY LLC 🇷🇺
Valstok VAB Series Cast Iron Knife Gate Valve with Manual Control
₸85,500-1,710,000
COMPLETE SERVICE LLC 🇷🇺
Brass Ball Valve for Temperature Sensor LD Pride 45.15.V-V.T.B DN 15 PN 40 Butterfly
₸1,425-5,700
LD PRIDE LLC 🇷🇺
Automatic Touch Sensor Mixer with Temperature Control KR5146DC
₸21,375-71,250
Kopfgescheit LLC RUSSIA 🇷🇺
Volumetric Cold and Hot Water Meter Dekast VSKM-15 iWAN RS Class "C" 110 mm
₸7,125-22,800
DEKAST LLC 🇷🇺
FAQ
•Are Russian water meters accepted by utilities in other countries?
Meters ship with metrological passports and initial verification under EAEU rules, which most CIS and Central Asian utilities accept directly. Elsewhere, acceptance depends on your national metrology authority; manufacturers support type-approval by providing technical files and test units. Clarify the approval route before contracting large municipal volumes.
•What pressure and temperature ratings do the gate and ball valves carry?
Standard utility lines are rated PN10 to PN25 for water up to 90–150 degrees depending on seal material, with higher classes available for industrial series. Each valve carries its rating cast or stamped on the body, and batch test protocols confirm shell and seat tightness per GOST procedures that parallel EN 12266.
•Can meters and valves be branded for our utility or distribution network?
Yes. On volume orders, plants print the distributor or utility name on meter dials, mould it into valve bodies or add it to labels and passports. Typical thresholds start around 500–1,000 units per SKU. Branding does not change the certification, which continues to reference the manufacturing plant.
•What is a realistic lead time for a municipal tender volume?
Catalogue meters and valves in tender quantities — say 5,000–20,000 meters or several thousand valves — normally take 30–60 days in production, since plants schedule verification capacity in batches. Add 7–14 days trucking to Central Asia or 25–40 days sea freight to the Gulf and Africa. Plan tender delivery schedules around those windows.
•Do suppliers stock spare parts and repair kits?
Yes, and this is a practical advantage of the category: seal kits, stems, wedges and meter mechanisms remain in production for many years because domestic utilities demand them. Order repair kits as a percentage of the main batch — 5 percent is a common rule — to keep your service department independent.