Тауарлар — Сантехника және құбыр арматурасы
Stainless Steel Wash Sink for Catering - VMEts Model
₸99,750-456,000
PROFESSIONAL KITCHEN EQUIPMENT LLC 🇷🇺
Vertical Elbow Joint Cable Tray CPV06-4-150-500 LESTA 150x500mm IEK
₸4,275-14,250
IEK Holding LLC 🇷🇺
Engineering Communication Construction for Water Supply and Sewage, Gas Supply
₸1,425,000-28,500,000
MKMS LLC 🇷🇺
Stainless Steel Work Table 1500x700x850 mm with Edge and Lower Shelf, Reinforced
₸71,250-256,500
Contact OJSC 🇷🇺
Single-Section Stainless Steel Wash Sink with Shelf for Mixer VMC 1/6756
₸42,750-142,500
BLOCK OJSC 🇷🇺
Vacuum Floor Toilet with Anti-Corrosion Steel and Flush Control System VU-VM 4 U
₸427,500-1,710,000
YAMYA-ENGINEERING LLC 🇷🇺
Slide Valve ZSh for Pipeline and Wellhead Applications
₸427,500-1,710,000
Technovek Oil and Gas Equipment Plant LLC 🇷🇺
FAQ
•Are Russian water meters accepted by utilities in other countries?
Meters ship with metrological passports and initial verification under EAEU rules, which most CIS and Central Asian utilities accept directly. Elsewhere, acceptance depends on your national metrology authority; manufacturers support type-approval by providing technical files and test units. Clarify the approval route before contracting large municipal volumes.
•What pressure and temperature ratings do the gate and ball valves carry?
Standard utility lines are rated PN10 to PN25 for water up to 90–150 degrees depending on seal material, with higher classes available for industrial series. Each valve carries its rating cast or stamped on the body, and batch test protocols confirm shell and seat tightness per GOST procedures that parallel EN 12266.
•Can meters and valves be branded for our utility or distribution network?
Yes. On volume orders, plants print the distributor or utility name on meter dials, mould it into valve bodies or add it to labels and passports. Typical thresholds start around 500–1,000 units per SKU. Branding does not change the certification, which continues to reference the manufacturing plant.
•What is a realistic lead time for a municipal tender volume?
Catalogue meters and valves in tender quantities — say 5,000–20,000 meters or several thousand valves — normally take 30–60 days in production, since plants schedule verification capacity in batches. Add 7–14 days trucking to Central Asia or 25–40 days sea freight to the Gulf and Africa. Plan tender delivery schedules around those windows.
•Do suppliers stock spare parts and repair kits?
Yes, and this is a practical advantage of the category: seal kits, stems, wedges and meter mechanisms remain in production for many years because domestic utilities demand them. Order repair kits as a percentage of the main batch — 5 percent is a common rule — to keep your service department independent.