Қалқан корпустары (ҚРН, ҚРВ)
Металл қалқан корпустары
Тарату және қосу қораптары
Кронштейндер және бекіткіштер
Пластик бокстар және қалқандар
Кіріс-тарату құрылғылары және ГРҚ
Клемма қораптары
Есеп және этаж қалқан корпустары
Қалқан аксессуарлары
Жол, кабель және тарату жәшіктері
Шинопроводтар
Изоляторлар және анкерлік арматура
Науа аксессуарлары мен қосқыштары
Кабель ұйымдастырғыштар, кабель-арналар
Шағын габаритті корпустар КМ/КМТ
Науа қақпақтары
Сатылы кабель науалары
Тік кабель науалары
Бұрыштық кабель науалары
Науаның бұрылыстары мен өткелдері
Профильдер, рейкалар және DIN-рейкалар
Өзгелері
Тауарлар — Корпустар және бекіткіштер
YKV-PLG-36-45-200 TITAN ВРУ-Х ХХ.45.ХХ ЛГ панелі (H=200) (2дн/жинақ) IEK
₸712.50-2,280
IEK Holding LLC 🇷🇺
Электромонтаждық және реттеу жұмыстарының зертханалық қондырғысы басқару панелімен (суытқыш машина басқару панелі) (Э
₸427,500-1,425,000
TRIMBIRT LLC 🇷🇺
Монтаждық гайка SM-GM 00, резьба диаметрі 6 мм–12 мм, металл қалыңдығы 6,0–10,0 мм, тот баспайтын болат
₸142.50-855
SZ EMI OJSC 🇷🇺
MKM13-N-18-31-Z TITAN 3 Металл корпус. ЩРн-18 (265х440х120) IP31 ақ IEK
₸4,275-14,250
IEK Holding LLC 🇷🇺
U-тәрізді профиль BSUP 7-000 50x70х200-дан 50x70-6000 мм-ге дейін металл қалыңдығы 3,0 мм тот баспайтын болат
₸1,425-8,550
SZ EMI OJSC 🇷🇺
Универсалды қақпақ бекіткіші KLFX, габариттік өлшемдері 57x30 мм, қалыңдығы 1,5 мм, мырышталған болат
₸42.75-171
SZ EMI OJSC 🇷🇺
Монтаждық бұрыш SMA 655, габариттік өлшемдері 46x150 мм, металл қалыңдығы 5,0 мм, ыстық мырышталған болат
₸427.50-1,710
SZ EMI OJSC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.