Тауарлар — Тоқылмаған материалдар
Non-woven Needle-punched Geotextile GEONOR® GT ECO 150 g/m², Width 2-6 meters, Roll 50m
₸570-4,560
GEONOR LLC 🇷🇺
Synthetic Fiber Non-Woven Thermal Bonded Fabric Sintepon, Density 80
₸285-1,710
LOTUS CONSTELLATION LLC 🇷🇺
Synthetic Fiber Non-Woven Thermal Bonded Sheets - Synthepon 60V, 60VK
₸285-1,710
LOTUS CONSTELLATION LLC 🇷🇺
Disposable Non-Woven Wipes White 20x30 cm 150 pcs Roll Model 601-797
₸427.50-1,710
CHISTOVYE OJSC 🇷🇺
Non-Woven Geotextile Fabric for Road Construction and Pipeline Ballasting, Surface Density 70-150 g
₸427.50-2,850
KOMITEKS OJSC 🇷🇺
Non-woven Geotextile Fabric for Road Construction and Pipeline Ballasting
₸427.50-2,850
KOMITEKS OJSC 🇷🇺
Disposable Nonwoven Material Napkins for Surgical Use TU 13.95.10-002-67798088-2020
₸142.50-1,140
DARLIN LLC 🇷🇺
FAQ
•What densities of spunbond are available and how do I choose?
Producers run the typical range from 15-17 g/m2 for light crop covers up to 100-150 g/m2 for packaging and furniture applications. Choose by function: lightweight grades for frost protection and row covers, 40-60 g/m2 for bags and disposable products, heavier grades for upholstery backing. State your application and the producer will recommend a grade and send rolls for trial.
•Is agricultural spunbond stabilized against sunlight?
Agro grades are normally UV-stabilized for one or more growing seasons, and the producer declares the stabilization level. For high-radiation climates in the Gulf or Africa, ask specifically for the seasonal lifetime under your conditions rather than relying on the standard rating, and consider the heavier-stabilized grades. Field behavior should be confirmed with a trial batch.
•How is wadding shipped without paying for air?
Thermal wadding and sintepon are compressed into bales or vacuum-packed rolls, which cuts shipped volume several-fold; the material recovers its loft after unpacking. Confirm the compression ratio and recovered thickness with the producer, since this determines how many tons fit a container. Loading plans and bale dimensions are provided with the quotation.
•Can geotextile from this section be used in road projects with engineering supervision?
Yes, producers supply needle-punched geotextile with declared tensile strength, elongation and density measured under Russian standards, and provide test reports with each batch. If your project engineer specifies parameters under ISO or ASTM methods, request the producer's comparative data or arrange third-party testing of delivery samples - both are routine for export contracts.
•What are realistic minimums and lead times for a first order?
Producers typically sell from about one ton per article for stocked grades; custom widths or colors start around 3-5 tons. Production lead time is short, usually 10-20 days, because lines run continuously. Transit adds 10-18 days overland to Central Asia or 30-45 days by sea to most other regions.