Үстел үсті жабындары
Өзгелері
Жиһаз фасадтары мен есіктер
Бүйір және сәндік панельдер
Үстел тірегіштері, аяқтары, қаңқалары
Сөре және стеллаж элементтері
Үстел үсті, қақпақтар мен антресольдар
Кереуеттің бас тіректері мен жинақтаушылары
Тіреулер, ілгіштер мен аксессуарлар
Жиһаз отырғыштары мен жәшіктер
Жиһаз айналары
Тауарлар — Фурнитура және жинақтаушылар
Kitchen Cabinet Facade Set with 2 Drawers in Alabaster - Marina LD.273150.000
₸7,125-22,800
ALMAZ LLC 🇷🇺
Kitchen Cabinet Front Set with 3 Drawers for 600mm Base - Jamis LD.296140.000
₸12,825-39,900
ALMAZ LLC 🇷🇺
Kitchen Cabinet Facade Set 350 - Indigo LD.298290.000 (Topaz Madeira Oak)
₸14,250-45,600
ALMAZ LLC 🇷🇺
Kitchen Cabinet Facade 1000mm Left - Sherwood LD.281190.000 (White Gloss/Black)
₸7,125-22,800
ALMAZ LLC 🇷🇺
High-Quality Facade Door 450mm, Type 2, White Textured Oak - Marina LD.273480.000
₸7,125-22,800
ALMAZ LLC 🇷🇺
Marina LD.273110.000 Complete Facade Kit for Kitchen Cabinet 400 with 3 Drawers (Alabaster)
₸7,125-22,800
ALMAZ LLC 🇷🇺
Kitchen Cabinet Facade Set 350 Finish (White Textured Oak) - Marina LD.273290.000
₸7,125-22,800
ALMAZ LLC 🇷🇺
Target Bench System Workstation 1400x700 with Front Panel, Art. TAR722
₸42,750-142,500
MODER OM LLC 🇷🇺
Mokka LD.274160.000 Kitchen Base Cabinet Front Set with 3 Drawers (800mm)
₸9,975-31,350
ALMAZ LLC 🇷🇺
Marina LD.273130.000 Kitchen Cabinet Facade Set with 2 Drawers (600mm, White Textured Oak)
₸7,125-22,800
ALMAZ LLC 🇷🇺
Country LD 245150.000 Facade 600 3 Drawers (Light Sona H / Green Sona H)
₸19,950-57,000
ALMAZ LLC 🇷🇺
Country LD 245110.000 Facade 500 with 2 Drawers in Light Sonama and Green Sonama
₸14,250-45,600
ALMAZ LLC 🇷🇺
FAQ
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.