Профили STRUT ва системаҳои монтажӣ
Анкерҳо
Болтҳо
Винтҳо
Гайкаҳо
Анкерҳои замин
Зажимҳо
Заклёпкаҳо
Тросҳо
Мустаҳкамкунакҳои монтажӣ
Кронштейнҳо
Кронштейнҳои кабелӣ
Дигар
Лотокҳои кабелӣ
Такяҳои монтажӣ
Плитаҳои монтажӣ
Чаҳорчӯбаҳои монтажӣ
Ҷудокунандаҳо
Рейкаҳои монтажӣ
Скобаҳо
Пайвасткунандаҳои монтажӣ
Кунҷакҳои маҳкамкунанда
Шурупҳои чӯбӣ
Маҳсулот — Крепеж ва метизы
Self-Locking Nut for Traumatic and Degenerative Spine Conditions
сом. 9.81-39.24
OSTEOSYNTHESIS LLC 🇷🇺
Metal Protection for Suzuki Jimny 4WD (Fuel Tank + Filter) (1.5) (2018-) with Mounting Kit
сом. 163.50-523.20
RAIWL LLC 🇷🇺
Complete Rear Wheel Hub Assembly for UAZ Vehicles with ABS, Spicer and Timken Hybrid, Model 316300310401000
сом. 163.50-523.20
UAZ LLC 🇷🇺
Post your Buy Requirement
Get Quotes from Verified Suppliers
Вақти худро сарфа кунед
Metal Skid Plate for Toyota Hilux Vigo 4WD (2005-2015) with Mounting Kit
сом. 163.50-523.20
RAIWL LLC 🇷🇺
Low Hexagon Self-Locking Nuts for Aviation Industry, OST 1 33059-80, 30ХГСА
сом. 3.27-19.62
RAM LLC 🇷🇺
Metal Fuel Tank and Filter Protection for Suzuki Jimny 4WD (1.5) (2018-) + Mounting Kit
сом. 228.90-654
RAIWL LLC 🇷🇺
Metal Underbody Protection for FORD RANGER (3.2) (2015-) LOWER CONTROL ARM with Mounting Kit
сом. 163.50-523.20
RAIWL LLC 🇷🇺
Metal Protection for Jeep Wrangler JL 4WD (Transmission) (V-2.0; 3.6; 2.2D) (2018-) + Mounting Kit
сом. 163.50-523.20
RAIWL LLC 🇷🇺
Most Popular
in Крепеж ва метизы
751+ Products
1
2
3
Ҷустуҷӯҳои маъмул
Профили STRUT ва системаҳои монтажӣ
Анкерҳо
Болтҳо
Винтҳо
Гайкаҳо
Анкерҳои замин
Зажимҳо
Заклёпкаҳо
Тросҳо
Мустаҳкамкунакҳои монтажӣ
Кронштейнҳо
Кронштейнҳои кабелӣ
Дигар
Лотокҳои кабелӣ
Такяҳои монтажӣ
Плитаҳои монтажӣ
Чаҳорчӯбаҳои монтажӣ
Ҷудокунандаҳо
Рейкаҳои монтажӣ
Скобаҳо
Пайвасткунандаҳои монтажӣ
Кунҷакҳои маҳкамкунанда
Шурупҳои чӯбӣ
FAQ
•Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?
Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.
•What does material traceability look like for alloy-steel fasteners?
For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.
•Are samples available before a production order?
Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.
•What are realistic lead times for mixed hardware orders?
Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.
•Which corrosion protection options are offered?
Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.