Калкан корпустары
Металл калкан корпустары
Бөлүштүрүү жана туташтыруу кутучалары
Кронштейндер
Пластик бокстор
Кириш-бөлүштүрүү түзмөктөрү
Клемма кутучалары
Эсеп жана кабат калкан корпустары
Калкан аксессуарлары
Жол жана кабель кутучалары
Шинопроводдор
Изоляторлор
Текче аксессуарлары
Кабель уюштургучтары
Кичине корпустар
Текче капкактары
Шаты кабель текчелери
Түз кабель текчелери
Бурчтуу кабель текчелери
Текченин бурулуштары
Профилдер жана ДИН-рейкалар
Башка
Товарлар — Корпустар жана бекемдөөлөр
Floor Distribution Panels Series SH, Height 481mm to 1120mm, Width 336mm to 945mm, Depth 12mm to 950mm, IP31 Protection
сом 783-3,654
Continent ETS LLC 🇷🇺
ЩУНС сериясынын эсептөө-распределение корпусу, бийиктиги 370мм. ден 500мм. ге чейин, туурасы 250мм. ден 310мм. ге чейин, коргоо даражасы IP54,
сом 1,305-5,220
Continent ETS LLC 🇷🇺
Вводно-распределительный аппарат ВРУ, бийиктиги 1700мм, туурасы 800мм, тереңдиги 450мм, климаттык аткарылышы УХЛ 4
сом 78,300-261,000
Continent ETS LLC 🇷🇺
Wall-Mounted Distribution Boards with Solid Metal Door, Series ЩРН
сом 1,305-5,220
Continent ETS LLC 🇷🇺
RS52 Series Linear Cabinet Enclosures from 1200mm to 2200mm High
сом 18,270-156,600
Continent ETS LLC 🇷🇺
Terminal Boxes Series TB 100mm to 400mm Height, 100mm to 800mm Width
сом 783-5,220
Continent ETS LLC 🇷🇺
UC2 Series Enclosures for Electrical Distribution, Height 300-1400mm
сом 1,305-15,660
Continent ETS LLC 🇷🇺
Post your Buy Requirement
Get Quotes from Verified Suppliers
Убакытты үнөмдөңүз
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.