محصولات — مبدلهای حرارتی و پمپ گرمایی
Rear Support for Plate Heat Exchanger FP/PF 205 (31, 40, 50)
﷼ 378,000-2,520,000
PALLANT ENGINEERING LLC 🇷🇺
Gas-Gas Heat Exchanger T-1 INGR-2016.011.05.00.000
﷼ 1,260,000,000-5,040,000,000
KURGANHIMMASH LLC 🇷🇺
Gas-Liquid Heat Exchangers GPM-TG for Natural Gas Heating
﷼ 378,000,000-2,520,000,000
GAZPROMASH LLC 🇷🇺
GreenTube Shell-and-Tube Heat Exchangers for Temperatures -70 to +1500°C, Pressure up to 25MPa, Diameter up to 3060mm
﷼ 378,000,000-5,040,000,000
REINNOLC LLC 🇷🇺
Tube Heat Exchanger for Thermal Processing of Liquid Food Products VГ
﷼ 378,000,000-1,512,000,000
SLAVUTICH LLC 🇷🇺
Glycol and Methanol Regeneration Units for Efficient Heating
﷼ 756,000,000-5,040,000,000
KURGANHIMMASH LLC 🇷🇺
Block Heat Point SPL MS-WT (Hot Water Supply System Unit)
﷼ 378,000,000-1,764,000,000
MEGATRON LLC 🇷🇺
Heat Energy Production and Transmission System
﷼ 3,780,000,000-15,120,000,000
BALTIYSKY ZAVOD OJSC 🇷🇺
Shell-and-Tube Heat Exchangers for Specialized Applications
﷼ 630,000,000-5,040,000,000
BOR-MACH LLC 🇷🇺
Gas-Gas Heat Exchanger Assembly Housing 20T-1 Black 1400 TU(G)-12.5-M1/20-9-T-2/2 00.00.000
﷼ 378,000,000-1,512,000,000
KURGANHIMMASH LLC 🇷🇺
Methanol Column Heat Exchanger T-104 Black 400 TPG-2.5-M1/20G-4-T-2 00.000
﷼ 126,000,000-756,000,000
KURGANHIMMASH LLC 🇷🇺
Dual Gas-Gas Heat Exchanger 20T-1 for Natural Gas Heating
﷼ 378,000,000-1,260,000,000
KURGANHIMMASH LLC 🇷🇺
Heat Exchangers and Their Units for Industrial Applications
﷼ 1,260,000,000-25,200,000,000
KURGANHIMMASH LLC 🇷🇺
Shell-and-tube heat exchanger unit AVO pos.X-104 AVZ-14.6-J-1.6-B5/8-A-6
﷼ 378,000,000-4,620,000,000
VOSTSIBMASH OJSC 🇷🇺
Water Heater KSк 4-7 - Bimetal Spiral Aluminum Fins
﷼ 6,300,000-20,160,000
Glazovsky Metallurgist Plant OJSC 🇷🇺
Heavy Gas Oil Heat Exchanger for Primary Raw Material 800ТПГ-4,0-Б2/25Г-4,5-К-4-УХЛ1-И
﷼ 378,000,000-1,512,000,000
PK "TT" OJSC 🇷🇺
Heat Pump Laboratory Setup for Waste Gas Heat Recovery (TOT-TNG)
﷼ 126,000,000-403,200,000
TRIMBIRT LLC 🇷🇺
Energy-Saving Ventilator TeFo1 for Residential and Office Use
﷼ 11,340,000-35,280,000
HEAT EXCHANGE LLC 🇷🇺
IN-type Shell-and-Tube Heat Exchangers and Tube Bundles
﷼ 378,000,000-2,520,000,000
TEPLOKHIM OJSC 🇷🇺
Panel Film Heat Exchangers for Liquid Cooling - UV-PL Series
﷼ 37,800,000-756,000,000
TECHNOFROST LLC 🇷🇺
Gas-Gas Heat Exchanger 040-T-2.1/2.2 for Gas Preparation
﷼ 378,000,000-1,512,000,000
KURGANHIMMASH LLC 🇷🇺
Regenerated Solution Heating Heat Exchanger MEA 325TPG-2.5-M*/20G-2-K-4-UHL1
﷼ 176,400,000-630,000,000
PK "TT" OJSC 🇷🇺
Shell-and-Tube Heat Exchangers TPG Type with Tube Bundles
﷼ 378,000,000-2,520,000,000
TEPLOKHIM OJSC 🇷🇺
Nord ES Series Plate Heat Exchanger for Efficient Heat Transfer
﷼ 63,000,000-252,000,000
PK "NORD" LLC 🇷🇺
Shell and Tube Heat Exchangers for Oil and Gas Industries
﷼ 126,000,000-25,200,000,000
PTIMASH LLC 🇷🇺
Plate Heat Exchanger "TIJ" for Efficient Heat Transfer
﷼ 7,560,000-75,600,000
IZHEVSK MOTOR PLANT "AXION-HOLDING" OJSC 🇷🇺
FAQ
•What information do I need to provide for a quotation?
Four things: the two media (for example water/water or steam/oil), inlet and outlet temperatures on both sides, flow rates, and maximum working pressure. With these, the factory runs a thermal calculation and proposes a specific plate pack or tube bundle with documented performance margins.
•Can a Russian plate exchanger replace an existing European unit?
In most cases yes, as a functional replacement matched to the same duty point and connection sizes. Suppliers do not copy proprietary plates, but they will size an equivalent unit and adapt flange positions where possible. Send the old unit's datasheet or nameplate photo for the fastest match.
•What about gaskets and spare plates later on?
Gaskets and plates for the supplier's own models are stocked at the factory and ship worldwide by courier. A prudent practice for remote sites is ordering a gasket set and several spare plates with the unit itself — the added cost is small compared with downtime.
•Are the exchangers pressure-tested and documented?
Yes. Units are hydraulically tested at the plant and shipped with a technical passport recording test pressure, materials and serial number, plus an EAC declaration where applicable. For oil and gas or municipal tenders, additional weld and material certificates can be arranged at order stage.
•How fast can a custom-calculated unit be delivered?
Typical production time is 20 to 45 days after the thermal calculation is approved, depending on size and materials. Small brazed units often ship from stock. Add roughly two weeks of trucking to Central Asia or four to six weeks of sea freight to the Gulf, Africa or Latin America.