محصولات — مبدلهای حرارتی و پمپ گرمایی
Horizontal Configuration Air Heater Heat Exchanger NORDMATIC HT-K 600 kW
﷼ 126,000,000-403,200,000
RZKO LLC 🇷🇺
Vertical Shell-and-Tube Low-Pressure Heater for Efficient Heating
﷼ 37,800,000-151,200,000
Nizhnetagilsky Zavod Teploobmennikov LLC 🇷🇺
Drainage Tank for Heat Transfer Fluids V-496 EP 40-0.3-2400-1-3-EN-T.00.000
﷼ 126,000,000-504,000,000
KURGANHIMMASH LLC 🇷🇺
Tube Bundle for Heat Exchanger TTRM2-2-48/89-6.3/4.0/6-G-M1*-HL1 (T-601/1,2,3,4) 04.000
﷼ 12,600,000-75,600,000
KURGANHIMMASH LLC 🇷🇺
Tube-in-Tube Heat Exchanger APORA DTA 64/38 6.0 304/316L H TU 28.25.11-001-50201614-23
﷼ 37,800,000-151,200,000
APORA LLC 🇷🇺
Block Heating Station SPL MS-FL (Heating and Ventilation System Filling Unit)
﷼ 75,600,000-504,000,000
MEGATRON LLC 🇷🇺
VП-TTP Tubular Heat Exchanger for Gas, Liquid, or Bulk Media
﷼ 37,800,000-252,000,000
TERMO-SEVERNY POTOK LLC 🇷🇺
Condenser Heat Exchanger Block "DEK-Light Condensate" T-304 BKT-8.0-1000-3 (T-304) AG.00.00.000 TU 28.25.11.110-313-00217298-2022
﷼ 378,000,000-1,260,000,000
KURGANHIMMASH LLC 🇷🇺
Raw Material Heater T-101V Black 400 TPG-4.0-M1/25G-2-T-2 00.000
﷼ 126,000,000-504,000,000
KURGANHIMMASH LLC 🇷🇺
Buffer Capacity Block BE-1 for Gas Condensate Support
﷼ 378,000,000-1,260,000,000
KURGANHIMMASH LLC 🇷🇺
TNG Type Shell-and-Tube Heat Exchangers and Tube Bundles
﷼ 378,000,000-2,520,000,000
TEPLOKHIM OJSC 🇷🇺
Buffer Capacity Block BE-1 for Gas Condensate Support
﷼ 378,000,000-1,260,000,000
KURGANHIMMASH LLC 🇷🇺
Rear Stand for Plate Heat Exchanger FP/PF 04(05,08,09,10,14,16,22)
﷼ 126,000-2,520,000
PALLANT ENGINEERING LLC 🇷🇺
Shell and Tube Heat Exchangers TП for Heating and Cooling
﷼ 126,000,000-2,520,000,000
DIMITROVGRADKHIMMASH OJSC 🇷🇺
SEPCOLD SC-THE Shell-and-Tube Heat Exchanger for Industrial Use
﷼ 37,800,000-756,000,000
ORBITA SERVICE LLC 🇷🇺
Heat Exchanger KTZH, Drawing 1400 TU-10.0-2.5-M1/20-9-T-2 00.00.000
﷼ 378,000,000-1,512,000,000
KURGANHIMMASH LLC 🇷🇺
Gas-Gas Heat Exchanger Block T-202-5, T-202-6 GPER KT 201.12.00.00.000
﷼ 630,000,000-2,520,000,000
KURGANHIMMASH LLC 🇷🇺
Heat Exchange Plates for Food Liquids – Non-toxic and Corrosion-resistant
﷼ 378,000-2,520,000
SLAVUTICH LLC 🇷🇺
Guide Set for Plate Heat Exchanger FP/PF 205 (31, 40, 50)
﷼ 1,260,000-12,600,000
PALLANT ENGINEERING LLC 🇷🇺
Shell-and-Tube Heat Exchanger Units, TU Type
﷼ 126,000,000-2,520,000,000
DIMITROVGRADKHIMMASH OJSC 🇷🇺
Heat Exchange Equipment for Heating and Cooling Processes
﷼ 1,260,000,000-7,560,000,000
VolgogradnefteMash OJSC 🇷🇺
GreenTube Shell-and-Tube Heat Exchangers for Temperatures -70 to +1500°C, 25MPa Pressure
﷼ 126,000,000-7,560,000,000
REINNOLLC LLC 🇷🇺
Buffer Storage Tank B, Volume 50-100000 liters (0.05-1000 m³)
﷼ 37,800,000-7,560,000,000
UralSpetsTrans LLC 🇷🇺
SUB Series Block Heat Points for Efficient Building Heating
﷼ 126,000,000-1,008,000,000
RIDAN LLC 🇷🇺
FAQ
•What information do I need to provide for a quotation?
Four things: the two media (for example water/water or steam/oil), inlet and outlet temperatures on both sides, flow rates, and maximum working pressure. With these, the factory runs a thermal calculation and proposes a specific plate pack or tube bundle with documented performance margins.
•Can a Russian plate exchanger replace an existing European unit?
In most cases yes, as a functional replacement matched to the same duty point and connection sizes. Suppliers do not copy proprietary plates, but they will size an equivalent unit and adapt flange positions where possible. Send the old unit's datasheet or nameplate photo for the fastest match.
•What about gaskets and spare plates later on?
Gaskets and plates for the supplier's own models are stocked at the factory and ship worldwide by courier. A prudent practice for remote sites is ordering a gasket set and several spare plates with the unit itself — the added cost is small compared with downtime.
•Are the exchangers pressure-tested and documented?
Yes. Units are hydraulically tested at the plant and shipped with a technical passport recording test pressure, materials and serial number, plus an EAC declaration where applicable. For oil and gas or municipal tenders, additional weld and material certificates can be arranged at order stage.
•How fast can a custom-calculated unit be delivered?
Typical production time is 20 to 45 days after the thermal calculation is approved, depending on size and materials. Small brazed units often ship from stock. Add roughly two weeks of trucking to Central Asia or four to six weeks of sea freight to the Gulf, Africa or Latin America.