محصولات — لوله کشی و اتصالات لوله
PROTOK Drainage Pump Stations for Efficient Water Management
﷼ 201,600,000-1,764,000,000
RDE ENGINEERING LLC 🇷🇺
Water Meter for Cold and Hot Water Measurement Decast VSKM-15 iWAN RS 110mm
﷼ 630,000-2,016,000
DEKAST LLC 🇷🇺
Wedge Gate Valve ZK for High Pressure Applications
﷼ 3,780,000-252,000,000
Kurgan Armature Plant LLC 🇷🇺
Gate Valve for Turbine Installations 1123-100-ЭК-01
﷼ 126,000,000-756,000,000
Energomash (Chekhov) - CZEM OJSC 🇷🇺
KV Series Slide Valve DN 15-1400 PN 1.6-105.0 MPa
﷼ 37,800,000-756,000,000
ENGINEERING TECHNOLOGIES LLC 🇷🇺
Bottom Valve for Lower Drainage and Filling 08083.8004.30
﷼ 3,780,000-12,600,000
Cheboksary Enterprise "Sespel" CJSC 🇷🇺
Wedge Gate Valves with Rubber Coated Wedge Type ZKR DN65 PN10/16 with Accessories
﷼ 3,780,000-12,600,000
ENECOS LLC 🇷🇺
LD Pride Brass Ball Valve M20 44.15.V-B.B.M.R for Liquid and Gas Control
﷼ 75,600-352,800
LD PRIDE LLC 🇷🇺
Steel Wedge Gate Valves ZKL2 DN up to 1400 mm PN 1.6-25.0 MPa
﷼ 37,800,000-756,000,000
NEFTEGAZDETAL LLC 🇷🇺
LD Pride Brass Ball Valve for Liquid and Gas Control Model 47.20.H-N-R
﷼ 75,600-302,400
LD PRIDE LLC 🇷🇺
FAQ
•Are Russian water meters accepted by utilities in other countries?
Meters ship with metrological passports and initial verification under EAEU rules, which most CIS and Central Asian utilities accept directly. Elsewhere, acceptance depends on your national metrology authority; manufacturers support type-approval by providing technical files and test units. Clarify the approval route before contracting large municipal volumes.
•What pressure and temperature ratings do the gate and ball valves carry?
Standard utility lines are rated PN10 to PN25 for water up to 90–150 degrees depending on seal material, with higher classes available for industrial series. Each valve carries its rating cast or stamped on the body, and batch test protocols confirm shell and seat tightness per GOST procedures that parallel EN 12266.
•Can meters and valves be branded for our utility or distribution network?
Yes. On volume orders, plants print the distributor or utility name on meter dials, mould it into valve bodies or add it to labels and passports. Typical thresholds start around 500–1,000 units per SKU. Branding does not change the certification, which continues to reference the manufacturing plant.
•What is a realistic lead time for a municipal tender volume?
Catalogue meters and valves in tender quantities — say 5,000–20,000 meters or several thousand valves — normally take 30–60 days in production, since plants schedule verification capacity in batches. Add 7–14 days trucking to Central Asia or 25–40 days sea freight to the Gulf and Africa. Plan tender delivery schedules around those windows.
•Do suppliers stock spare parts and repair kits?
Yes, and this is a practical advantage of the category: seal kits, stems, wedges and meter mechanisms remain in production for many years because domestic utilities demand them. Order repair kits as a percentage of the main batch — 5 percent is a common rule — to keep your service department independent.