محصولات — لوله کشی و اتصالات لوله
Full Bore Straight-Through Valve with Single Plate Gate, Type ZShS
﷼ 12,600,000-100,800,000
AK "KORVET" OJSC 🇷🇺
Automatic Touchless Faucet Kopfgescheit KR5148V-DC
﷼ 3,780,000-12,600,000
Kopfgescheit LLC RUSSIA 🇷🇺
Automatic Touchless Faucet with Temperature Control, KR5143DC
﷼ 1,260,000-6,300,000
Kopfgescheit LLC RUSSIA 🇷🇺
Wedge Gate Valves with Rising Spindle DN 15-1200, PN 1.6-25.0 MPa
﷼ 12,600,000-252,000,000
DINAMIKA LLC 🇷🇺
LD Pride Brass Ball Valve for Liquid and Gas Control, Model 47.15.Н-Н.Б.GAS
﷼ 75,600-403,200
LD PRIDE LLC 🇷🇺
Manual Bitumen Bottom Valve for Tankers Model KD-B-100
﷼ 37,800,000-126,000,000
ELECTROMAGNIT CJSC 🇷🇺
Bronze Flanged Non-Return Angle Valve DN 100, PN 1.0 MPa ITSHL.491925.023-02
﷼ 3,780,000-12,600,000
ARMALIT OJSC 🇷🇺
FAQ
•Are Russian water meters accepted by utilities in other countries?
Meters ship with metrological passports and initial verification under EAEU rules, which most CIS and Central Asian utilities accept directly. Elsewhere, acceptance depends on your national metrology authority; manufacturers support type-approval by providing technical files and test units. Clarify the approval route before contracting large municipal volumes.
•What pressure and temperature ratings do the gate and ball valves carry?
Standard utility lines are rated PN10 to PN25 for water up to 90–150 degrees depending on seal material, with higher classes available for industrial series. Each valve carries its rating cast or stamped on the body, and batch test protocols confirm shell and seat tightness per GOST procedures that parallel EN 12266.
•Can meters and valves be branded for our utility or distribution network?
Yes. On volume orders, plants print the distributor or utility name on meter dials, mould it into valve bodies or add it to labels and passports. Typical thresholds start around 500–1,000 units per SKU. Branding does not change the certification, which continues to reference the manufacturing plant.
•What is a realistic lead time for a municipal tender volume?
Catalogue meters and valves in tender quantities — say 5,000–20,000 meters or several thousand valves — normally take 30–60 days in production, since plants schedule verification capacity in batches. Add 7–14 days trucking to Central Asia or 25–40 days sea freight to the Gulf and Africa. Plan tender delivery schedules around those windows.
•Do suppliers stock spare parts and repair kits?
Yes, and this is a practical advantage of the category: seal kits, stems, wedges and meter mechanisms remain in production for many years because domestic utilities demand them. Order repair kits as a percentage of the main batch — 5 percent is a common rule — to keep your service department independent.