کابلهای قدرت فشار ضعیف (تا ۱ کیلوولت)
کابلهای قدرت فشار متوسط (۶ تا ۳۵ کیلوولت)
سیمهای نصب و خانگی
کابلهای فشار ضعیف با هادی آلومینیومی
کابلهای مخابراتی، اعلام و شبکه ساختاریافته
کابلهای فشار ضعیف با هادی مسی
کابلهای کنترل
کابلهای نصب
سرکابل و مفصل
سیمهای خودنگهدار SIP
یراقآلات سیم و کابل
کابلهای دریایی، نفت و گاز و معدن
لوازم جانبی کابل
کابلهای فیبر نوری
سیم رابط و سیار
سایر محصولات کابلی
شمشهای مسی و آلومینیومی
کابلهای ترموکوپل
سیمهای نصب و سیمکشی
سیمهای روکشنشده برای خطوط هوایی
سیم لاکی و سیمپیچی
سایر
محصولات — کابلها و سیمکشی
Insulated Copper Wire with High-Temperature Enamel and Glass Fiber Coating (PESTD Mark)
﷼ 37,800-252,000
PSKOVKABEL LLC 🇷🇺
سیم مسی گرد لعابی با عایق لعابی بر پایه پلیاستر ایمید، با لایه چسب اضافی بر پایه آروماتیک
﷼ 25,200-151,200
KAMSKY CABLE LLC 🇷🇺
سیم آلومینیومی گرد یا مستطیلی، عایق شده با نوارهای کاغذی کابل و/یا تلفن، نوع APB
﷼ 12,600-100,800
PSKOVKABEL LLC 🇷🇺
سیم مسی لاکی مدل PEIIP1-155 مستطیلی بر پایه پلیاستر ایمید با شاخص دما 155
﷼ 25,200-252,000
SKT GROUP LLC 🇷🇺
کابل غیر عایق با هسته چند رشته ای آلومینیومی به شکل گرد بدون پوشش (A)
﷼ 25,200-252,000
GOSTKABEL LLC 🇷🇺
AAAC-Z 928-3Z Compact Bare Conductor for High Voltage Transmission
﷼ 378,000-1,260,000
LAMIFIL LLC 🇷🇺
کابل غیر عایق فشرده برای خطوط هوایی انتقال برق با ولتاژ بالا مدل AAAC-Z 504-2Z
﷼ 378,000-1,260,000
LAMIFIL LLC 🇷🇺
Uninsulated Compacted Stranded Aluminum Cables with Steel Core for Aerial Lines
﷼ 37,800-151,200
Irkutskkabel OJSC 🇷🇺
Compact Uninsulated Conductor for High Voltage Power Lines AAAC-Z 148-1Z
﷼ 378,000-1,260,000
LAMIFIL LLC 🇷🇺
کابل غیر عایق فشرده با هسته فولادی برای خطوط انتقال برق با ولتاژ بالا مدل AACSRZ
﷼ 378,000-1,260,000
LAMIFIL LLC 🇷🇺
کابل غیر عایق فشرده برای خطوط هوایی انتقال برق با ولتاژ بالا مدل AAAC-Z 707-2Z
﷼ 378,000-1,260,000
LAMIFIL LLC 🇷🇺
کابل های غیر عایق برای خطوط هوایی انتقال برق، نوع: آَسکپ - 185/29 میلی متر مربع
﷼ 37,800-151,200
AGRO CABLE LLC 🇷🇺
FAQ
•How do Russian cable types correspond to IEC designations?
Construction principles match: VVG corresponds to copper PVC-insulated power cable of the IEC 60502-1 type, AVBbShv to armoured aluminium cable, and SIP to aerial bundled conductor. Cross-sections follow the same square-millimetre series. Suppliers issue comparison sheets and full construction drawings so your engineers can approve equivalence against project specifications.
•What is the minimum order — can I buy less than a full drum?
The drum is the practical unit: cutting opens a factory length and most plants avoid it for small remnants. However, plants will wind custom lengths to order — say, 12 drums of 350 metres to match your feeder runs — which is more useful than buying standard lengths and generating offcuts. Project lots start around 5–10 km total.
•Are fire-rated and halogen-free executions available?
Yes. Most power and control families come in low-smoke halogen-free (ng-LS, ng-HF) and fire-resistant (FR) executions, tested for flame spread, smoke density and circuit integrity under fire. State the fire performance class your code requires and the plant will match it and attach the corresponding test protocols.
•What documentation supports a utility tender submission?
Plants provide type test protocols, routine test certificates per drum, EAC conformity declarations, construction drawings and ISO 9001 factory certification. For medium voltage cable, partial discharge and voltage test records are included. This package normally satisfies tender technical files; specific national homologation, where required, is discussed case by case.
•How is cable shipped and how long does it take?
Drums load into containers or open wagons; a 40-foot container carries roughly 15–25 tonnes of cable depending on drum sizes. Production of non-stock positions takes 2–5 weeks. Trucking to Central Asia adds 7–14 days; sea freight from Novorossiysk or St. Petersburg to the Gulf or East Africa runs 25–45 days.
•Can conductors be supplied in aluminium to cut project cost?
Yes, and this is a major lever: aluminium low voltage cable, with 531 listings here, prices well below copper for distribution feeders where the larger cross-section is acceptable. Suppliers will recalculate your copper schedule into aluminium equivalents, showing the cross-section conversion and the cost difference per kilometre, so you can decide line by line.