قنوات تثبيت سترات وأنظمة تركيب
مثبتات تثبيت
براغي
مسامير ملولبة
صواميل
مثبتات أرضية
مشابك
براشيم
حبال وكابلات سلكية
تجهيزات تثبيت
حوامل
حوامل ومثبتات كابلات
أخرى
مسارات كابلات وملحقاتها
دعامات تثبيت
ألواح تثبيت
إطارات تثبيت
فواصل
قضبان تثبيت (دين ريل)
دبابيس تثبيت
موصلات تثبيت
زوايا تثبيت
مسامير خشب
المنتجات — المثبتات
إطار تركيبي مضاء LED من CADUCEUS ALING Experience، 4 م، رقم 71304.5
SAR 11.25-67.50
ش.ذ.م.م كادوسей 🇷🇺
Bolt OST 1 31185-80, OST 1 31186-80, OST 1 31188-80, OST 1 31189-80, OST 1 31190-80, OST 1 31192-80, OST 1 31193-80.
SAR 0.11-2.25
ش.ذ.م.م أفياسيرفيس 🇷🇺
مجموعة التركيب IP65 لتركيب الدوائر الآمنة (TIS 34.1.3.90.000-01)
SAR 337.50-1,350
ش.ذ.م.م أورالتخيس 🇷🇺
إطار تركيب CADUCEUS ALING Experience مع إضاءة خلفية LED زرقاء، 6م، تثبيت بالبراغي، فن. 71306.5
SAR 11.25-67.50
ش.ذ.م.م كادوسей 🇷🇺
وحدة معدنية من الفولاذ المقاوم للصدأ لرفوف الكابلات SMO 41x21x00-000
SAR 11.25-67.50
ش.م مصنع سز إمي 🇷🇺
الأسئلة الشائعة
•Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?
Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.
•What does material traceability look like for alloy-steel fasteners?
For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.
•Are samples available before a production order?
Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.
•What are realistic lead times for mixed hardware orders?
Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.
•Which corrosion protection options are offered?
Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.