قنوات تثبيت سترات وأنظمة تركيب
مثبتات تثبيت
براغي
مسامير ملولبة
صواميل
مثبتات أرضية
مشابك
براشيم
حبال وكابلات سلكية
تجهيزات تثبيت
حوامل
حوامل ومثبتات كابلات
أخرى
مسارات كابلات وملحقاتها
دعامات تثبيت
ألواح تثبيت
إطارات تثبيت
فواصل
قضبان تثبيت (دين ريل)
دبابيس تثبيت
موصلات تثبيت
زوايا تثبيت
مسامير خشب
المنتجات — المثبتات
لوحة T بشكل SMA 616، بأبعاد 140x40 مم، بسماكة 5 مم، فولاذ مقاوم للصدأ AISI 304
SAR 11.25-67.50
ش.م مصنع سز إمي 🇷🇺
ترافيرس ملف تعريف مزدوج BSUT 5D 112x150x250 مم من الفولاذ المقاوم للصدأ
SAR 33.75-112.50
ش.م مصنع سز إمي 🇷🇺
لوحة X-شكل SMA 628، بأبعاد 40x120 مم، بسمك 5.0 مم، من الفولاذ المقاوم للصدأ AISI 304
SAR 6.75-27
ش.م مصنع سز إمي 🇷🇺
سكة معلقة مثقبة SKЕ-000، بأبعاد من 41x30x200 مم إلى 41x30x2000 مم
SAR 11.25-112.50
ش.م مصنع سز إمي 🇷🇺
تراس U-شكل BSUT 8K، أبعاد 97x120 مم، قاعدة 100x220 مم، سمك المعدن 6.0 مم
SAR 11.25-67.50
ش.م مصنع سز إمي 🇷🇺
لوحة L الشكل SMA 615، بأبعاد 40x80 مم، سمك 5.0 مم، فولاذ مقاوم للصدأ AISI 316L
SAR 5.63-22.50
ش.م مصنع سز إمي 🇷🇺
تراس مفصلي مزدوج من BSUS 5D، 190x200x270 مم، فولاذ مقاوم للصدأ 8 مم
SAR 33.75-135
ش.م مصنع سز إمي 🇷🇺
الأسئلة الشائعة
•Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?
Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.
•What does material traceability look like for alloy-steel fasteners?
For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.
•Are samples available before a production order?
Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.
•What are realistic lead times for mixed hardware orders?
Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.
•Which corrosion protection options are offered?
Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.