Output power in automatic matching mode for 1 kOhm load resistance of KP-Tg Generator, not less than
10 W
Depth of KP-Tp Receiver trace, up to
5 m
Sensitivity of the KP-Tp Receiver at maximum gain, not less than
至少25微伏
Maximum current consumption of the KP-Tg Generator load
2 A
Rated supply voltage of Generator KP-Tg
B1/B8 2100/900 MHz V
Duration of pause between KP-Tg Generator parcels
0.29
KP-Tg generator signal sending period
1.92
Output power in the automatic matching mode for 50 ohm load resistance of Generator KP-Tg, not less
2 W
Maximum power delivered to the line in manual power control mode (with load impedance >100 ohms) Generator K
20 W
Effective matching resistance range of KP-Tg Generator
1...1000 ohm
Operating frequencies of the KP-Tg Generator
(50;273.5;420;480;580;720;780) ± 0.5;(2187.5;5500;10000) ± 1
The generator has a
发电机提供自动保护,防止设备电路在负载电阻剧烈波动时发生故障
In device provided
显示当前电压、负载电流、信号功率和负载电阻。如果发电机输出端设置的电压过低,无法测量高电阻(如果负载电阻高于发电机可测量的范围
KP-Tg has 3 modes of operation
- 高频(连续高频信号生成); - 高频-P(带暂停的高频信号生成); - 低频-高频-P(带暂停的低频和高频信号生成);在这些模式下,可以进行平滑的手动功率调整和自动调整。
The KP-Tg generator is a
一种具有自动输出信号功率调节(自动线路匹配)功能的发生器,旨在向通信线路输出特殊信号,以便随后使用接收器(kp-tp)确定路径和深度
The KP-Tp receiver is structurally designed as a
接收器KP-Tp采用铝合金制成的便携式单元。单元内部有一个锂聚合物电池为设备供电。
Cable trace detection indication in two ways
通过指示器上的水平变化和声学信号的存在
Accuracy of KP-Tp Receiver trace determination at the depth of 0.8 m, not more than 0.8 m
15 cm
Sensitivity of the KP-Tp Receiver at minimum gain, not less
至少75毫伏
Bandwidth of KP-Tp Receiver
4...160
Operating frequencies of Receiver KP-Tp
25
Power supply voltage for KP-Tp Receiver
3.7 V
Current consumption of the KP-Tp Receiver, not more than
130毫安
Overall dimensions of the receiver, not more than
127 x 60 x 28 mm
Dimensions of receiving antenna, max.
1040 x 155 x 125 mm
Weight of receiver, not more
0.65 kg
Weight of receiving antenna, not more
0.45 kg
Overall dimensions of the generator, not more
120 x 60 x 150 mm
Weight of the generator, not more than
2 kg